Table of Contents
Advertisement
U AV - M I C R O P O R TA B L E A N A LY Z E R S | G L A 1 3 3 S E R I E S | U M/G L A 1 3 3 - E N R E V. B
. . .4
Safety
WARNING!
Only ABB engineers/ABB service personnel or ABB
certified partners may open the analyzer cover or perform
internal maintenance or Service the laser .
Failure to do so may result in damage to the analyzer and
electric shock .
ABB repairs ensures high quality level of service . Our highly
skilled engineers mean that all certifications remain valid on
all devices .
WARNING!
For maintenance or service, please contact your local sales
representative or ABB service support at:
icos .support@ca .abb .com
Using this analyzer in a manner not specified by ABB may
result in damage to the analyzer and render it unsafe to
operate .
Certification
The analyzer certifications are listed in Table 2 .
Table 2: Analyzer Safety Certifications
Symbol
EMC Directive, Radio Directive, Low Voltage
Directive, Laser Safety, RoHS and WEEE
Title 21 Code of Federal Regulations, 1040.10 and
1040.11 except for deviations pursuant to Laser
Notice no.50, Dated June 24,2007 and IEC 60825-
Standards Tested & Met
1: 2014
WEEE Directive
The analyzer is not subject to WEEE Directive 2002/96/
EC (Waste Electrical and Electronic Equipment) or relevant
national laws (for example, ElektroG in Germany) .
The product must be disposed of at a specialized recycling
facility . Do not use municipal garbage collection points .
According to the WEEE Directive 2002/96/EC, only products
used in private applications may be disposed of at municipal
garbage facilities . Proper disposal prevents negative effects on
people and the environment and supports the reuse of valuable
raw materials .
Labels
The following three labels are on or in the analyzer to identify
hazardous areas . The first two labels are located on the carbon
fiber plate on the bottom of the analyzer . The last label is
located on the laser enclosure adjacent to the OA-ICOS cell .
Table 3: Radiation Labels
Label
7
Description
The laser is rated Class 3B
(invisible laser radiation) when
the housing is open .
Only ABB engineers/ABB
service personnel or ABB
certified partners may open
the analyzer cover or perform
internal maintenance or
service the laser .
Name plate label with Laser
class information showing
that it is a Class 1 laser
product . Refer to the user
guide for installation and
operating instructions .
The fiber laser radiation is
visible only when the laser
enclosure is removed .
Advertisement
Table of Contents
