Explore 2000
.................................................................................................................................................................................................................................................................................................
5‐2. Hardware Function
Hardware Function
Power Jack
Power Button (On / Off)
Power Button
(Enable / Disable Log mode)
LCD Backlight Button (On / Off)
Tool Button ‐Distance Unit
Switch (Metric / Imperial)
Tool Button ‐ Reset
Measurement
Note: The measurement value will be saved even when the device is turned off. Only after
you reset it by pressing Reset Measurement button will its value be erased.
.................................................................................................................................................................................................................................................................................................
5
Take the power cable and connect it to the power jack
(mini USB type) for charging only
Press and hold for 5 sec to power On/Off Explore 2000.
After power on Explore 2000, press and hold for 1 sec to
enable/disable log mode. Then Explore 2000 would
start/stop logging and the log indicator would
appear/disappear.
After power on Explore 2000, press and hold for 1 sec to
enable/disable LCD backlight.
After power on Explore 2000, press and hold for 1 sec to
switch between two distance unit
After power on Explore 2000, press and hold for 5 sec to
reset measurement value: Odometer, Timer, and
Average Speed
Description
www.Qstarz.com