Table of Contents
Advertisement
Beyond Navigation
.................................................................................................................................................................................................................................................................................................
‐ Charging your battery
For the first time using the Explore 2000, please charge battery until it is fully charged. Take
the power cable and connect it to the power jack (mini USB type) and recharge through USB
cable, travel charger, or car cigarette adaptor. This will begin to charge the battery.
Charging time is about 3 hours typically.
‐ When the Battery indicator starts to flash, battery power is in low status. Please recharge.
‐ When the battery charge LED is on, the battery is under charging mode.
‐ When the battery charge LED is off, the battery is fully charged.
NOTE 1: During charging under off status, the device is unable to be turned on. If you wish
to use the device during charging, please turn on the device before plug in the
mini USB cable.
NOTE 2: During charging under on status, the Bluetooth function is disabled. If you wish to
use Bluetooth connection, please unplug the mini USB cable.
NOTE 3: Please recharge the battery on a regular interval if the unit is not used for a long
time.
.................................................................................................................................................................................................................................................................................................
www.Qstarz.com
Explore 2000
10
Advertisement
Table of Contents
