Table of Contents
Advertisement
Ford Pro
AC Charging Station 11.5 kW
™
Installation Kit
Equipment List
Standard Installation – What you will need:
Cordless Drill (Phillips bit with extender) –
include 1/8 drill bit for pilot holes
240V AC Voltmeter
Flathead Screwdriver
NOTE: If using the Alternate Installation,
a Phillips Head Screwdriver will also
be needed.
Stud Finder
NEMA 6-50 Outlet (Only used for the 40A
residential charger)
#6 AWG 90° C copper wire should
be used for 48A charger and #8 AWG
90° C copper wire should be used
for a 40A charger.
NOTE: 1. Wire must have a temperature
rating of 90° C or higher. 2. Do not set the
amp switch higher than 40A unless hard-
wired to a dedicated 60A branch protection
circuit breaker.
Ford Pro contact info: chargingsupport@fordpro.com and 1-800-34-FLEET
Quick Start Installation Guide
Certified Electrician (Recommended)
Level
7/16 Socket Wrench
40A charger requires a 2-pole, 240V,
50A circuit breaker. 48A charger requires
a 2-pole, 240V, 60A circuit breaker.
3
Advertisement
Table of Contents
