Table of Contents
Advertisement
HCD-EC709iP/EC909iP
2-3.
ORNAMENT PLATE (DOCK) OR iPod ASSY
2 Push in flat-head screwdriver.
Note 1: Avoid a claw and put a
flat-head screwdriver in.
3 claw
2 Push in flat-head screwdriver.
1 Open the iPod dock.
Note 1: Avoid a claw and put a
flat-head screwdriver in.
3 claw
4 Confirm four claws has come off
after shutting the iPod dock.
Note 2: Push the gap by the flat-head screwdriver
when not coming off.
– Bottom view –
7 ornament plate (dock) or iPod assy
6 three claws
5 Turn up a ornament plate (dock) or
iPod assy low part and remove it without
using by the flat-head screwdriver.
– Bottom view –
7
Advertisement
Table of Contents
