Table of Contents
Advertisement
cNODE Micro Instruction Manual
SECTION 1: Identification
The specification describes the technical parameters for the battery.
cNODE Micro contains a custom made 14.5 Ah Li-Ion battery.
• Product name: cNODE Micro battery
• Part number: 426688
• Manufacturer: Kongsberg Maritime AS
• Address: Strandpromenaden 50, 3190 Horten, Norway
• Telephone: +47 33 03 24 07 (24 h)
• Email address:
km.support.hpr@kongsberg.com
• Website :
https://www.kongsberg.com/maritime
Note
The battery is a solid and sealed unit. The battery cannot be opened to reveal the
individual cells.
For additional information about the cells inside the sealed battery pack, see the safety
data sheet provided by the cell manufacturer.
https://lithiumwerks.com/
SECTION 2: Hazards identification
The battery is not labelled with a hazmat label. It is not classified as dangerous or
hazardous when undamaged and used as intended, and as such it is exempted from
GHS (Globally Harmonized System of Classification and Labelling of Chemicals)
classification and labelling.
Do not open, disassemble, crush or burn the battery. The battery contains dangerous
ingredients. Exposure to the ingredients contained within the battery cells could be
harmful. The battery cells include a barrier, preventing exposure to the user and
environment. The battery cells are not classified as hazardous according to Regulation
(EC) No. 1272/2008.
The chemicals in the battery cells are contained in a sealed enclosure. Risk of exposure
occurs only if the cell is mechanically, thermally or electrically abused to the point
of compromising the enclosure. If this occurs, exposure to the electrolyte solution
contained within can occur by inhalation, ingestion, eye contact and skin contact. The
electrolyte solution can be corrosive and may cause irritation and burns.
Other hazards
• Overcharge: If the cells that form the battery block are overcharged, the results may
be a thermal runaway.
38
426351/C
Advertisement
Table of Contents
Need help?
Do you have a question about the cNODE Micro and is the answer not in the manual?