Konsberg cNODE Micro Instruction Manual page 2

Document information
• : Kongsberg cNODE Micro
Product
• : Instruction Manual
Document
•
Document part number
• : C
Revision
• : 30 January 2023
Date of issue
Copyright
The information contained in this document remains the sole property of Kongsberg
Maritime AS. No part of this document may be copied or reproduced in any form or by
any means, and the information contained within it is not to be communicated to a third
party, without the prior written consent of Kongsberg Maritime AS.
Warning
The equipment to which this manual applies must only be used for the purpose for
which it was designed. Improper use or maintenance may cause damage to the
equipment and/or injury to personnel. You must be familiar with the contents of the
appropriate manuals before attempting to operate or work on the equipment.
Kongsberg Maritime disclaims any responsibility for damage or injury caused by
improper installation, use or maintenance of the equipment.
Disclaimer
Kongsberg Maritime AS endeavours to ensure that all information in this document is
correct and fairly stated, but does not accept liability for any errors or omissions.
Support information
If you require maintenance or repair, contact Kongsberg Maritime's
support organisation. You can also contact us using the following address:
km.support.hpr@kongsberg.com. If you need information about our other products,
visit https://www.kongsberg.com/maritime.
: 426351
Kongsberg Maritime AS
www.kongsberg.com