Advertisement
The VideoMate 7500XY is fully equipped for dissolve
operation and is fully compatible with external dissolve
control systems already in existence. Dissolve opera-
tion is controlled by using the Kodak Ektapro IR
Remote System RA/LP, available from Navitar as an
option.
In the past, most projectors were controlled by simple
contact closure. Today's advanced boardroom control
systems, however, are using RS-232 for control of the
AV components and room functions.
With the VideoMate 7500XY, you can electronically
control the projector, video camera, zoom lens and X/Y
image positioning functions of your slide-to-video
transfer unit by RS-232 control from your PC computer
or boardroom control system via the RS-232 (9-pin sub
D socket) located on the video output panel. Use a 9-
pin D-Sub male to 9-pin D-Sub female for connection
(1:1, shielded).
A software control package for a PC computer is
available.
The motorized zoom function allows you to zoom in on
a slide for increased magnification or zoom out to view
a vertical slide.
You can pre-program the exact slide sequence you
require or randomly jump to any slide tray position at
any time. For example, you can randomly program
your slide sequence to go from slide #1 to slide #10
and have different zoom positions (magnifications) and
brightness presets for each slide. Just punch the
number of the desired slide into your control system
and press enter. It's that simple.
The VideoMate 7500XY can be genlocked into any
video system. In order to utilize the genlock feature, a
second video source, a video switcher and the appro-
priate input/output cables are required. See page 22 for
more information.
8
Advertisement
