Table of Contents
Advertisement
TMC Settings Window
In the
TMC S
tings determine how received traffic messages will affect subsequent routing.
On the
M
AIN WINDOW
1. Tap
Options
Select another station
On the
TMC S
• Tap
Note: Some stations do not have TMC information.
Select Tuning Mode Settings
On the
TMC S
1. In the T
Automatically
Hold station
Hold frequency
2. Tap
3. Tap the
Recalculating Route
On the
TMC S
1. In the
Recalculate Route
On Request
Automatically
November 2008
Version 1.0
, you can set and configure the TMC receiver, these set-
ETTINGS WINDOW
:
>
Traffic > Settings.
:
TATUS
WINDOW
(
) and
To the Left
:
TATUS WINDOW
field, select an option:
uning Mode
The system searches for another station if reception becomes
poor.
The system searches for the same station on a different fre-
quency if the signal becomes poor.
The system does not search for another station if reception
becomes poor.
(
) to view the list and select an option.
List
button to save your changes.
Done
:
TATUS WINDOW
field, select an option:
The route is only recalculated when requested.
The route is automatically recalculated every time a severe traf-
fic event is identified on the route.
NAVIGON 7200T User's Guide
NAVIGON, INC.
(
) to tune to another station.
To the Right
NAVIGON Lifetime Traffic
TMC Settings Window
123
Advertisement
Table of Contents
