Table of Contents
Advertisement
Getting Started
Installing the Car Cradle
Placing the Navigation Device in the cradle
On the back of the NAVIGON 7200T there is a circle with two recesses.
1. Insert the navigation device into the holder by angling the top projection on the
cradle into the top recess on the back of the device.
2. Tilt the device down slightly until the bottom projection clicks into place in the bot-
tom of the mount.
3. Adjust the navigation device so that it can be seen easily.
Powering the navigation device
Included with the NAVIGON deviceNAVIGON 7200T is a car charger cable with which
power can be supplied to the navigation device using the vehicle's cigarette lighter.
The car charger cable is connected to the NAVIGON deviceNAVIGON 7200T using
the power connection port
Caution!
ing voltage of 12V only.
Connecting an Optional GPS Antenna (Not Included)
With the NAVIGON 7200T
with the device).
1. Connect the GPS antenna to the external antenna/headset socket
antenna) on the NAVIGON 7200T.
2. Secure the antenna to the mounting surface using the suction cups.
12
The car charger cable is to be connected to cigarette lighters with an operat-
,
you can also use an external GPS antenna (not provided
NAVIGON 7200T User's Guide
NAVIGON, INC.
(Power) on the bottom of the device.
(GPS
November 2008
Version 1.0
Advertisement
Table of Contents
