Summary of Contents for EchoNous Kosmos Grab and Go on AI Stand
Page 1
DocuSign Envelope ID: 26EA4BCC-6B8A-408A-AC15-D4FBCB359670 Installation Guide Installation Guide Kosmos Grab and Go on AI Stand Parts Reference Tablet (4) M4 x 8mm BHTS (Button Head Torx Screw) (1) T-10, (1) T-15, (1) T-20 (1) M3 x 8mm BHTS (2) Cable Clip (2) M3.5 x 1.65 x 10mm BHTS...
Page 2
DocuSign Envelope ID: 26EA4BCC-6B8A-408A-AC15-D4FBCB359670 Installing tablet mount to column Using a T20 Torx wrench, secure tablet mount with (4) M4 x 8mm BHTS as shown. (4) M4 x 8mm BHTS (Button Head Torx Screw) P007633-001 Rev A DU-ECO-0002-40 Rev A 8/26/2022 GCX Corp. Page 2 of 8...
Page 3
DocuSign Envelope ID: 26EA4BCC-6B8A-408A-AC15-D4FBCB359670 (2) Cable Clip (2) M3.5 x 1.65 x 10mm BHTS Installing e-Enclosure (1) ¼-20 x ¾ Set Screw P007633-001 Rev A DU-ECO-0002-40 Rev A 8/26/2022 GCX Corp. Page 3 of 8...
Page 4
DocuSign Envelope ID: 26EA4BCC-6B8A-408A-AC15-D4FBCB359670 Connect the 40” USB on the HUB. Connect the HUB Power supply DC cable (routed through the mouse hole). Route the USB cable to the right side and the power supply to the left. Route the USB cable up the column. P007633-001 Rev A DU-ECO-0002-40 Rev A 8/26/2022 GCX Corp.
Page 5
DocuSign Envelope ID: 26EA4BCC-6B8A-408A-AC15-D4FBCB359670 Power Supply Mount (supplied with roll stand) P007633-001 Rev A DU-ECO-0002-40 Rev A 8/26/2022 GCX Corp. Page 5 of 8...
Page 6
DocuSign Envelope ID: 26EA4BCC-6B8A-408A-AC15-D4FBCB359670 Cable Cleat (supplied with roll stand) Attaching e-Enclosure cover (3) M4 x 12mm PHMS P007633-001 Rev A DU-ECO-0002-40 Rev A 8/26/2022 GCX Corp. Page 6 of 8...
Page 7
DocuSign Envelope ID: 26EA4BCC-6B8A-408A-AC15-D4FBCB359670 Cable Routing Cable Cleat Column Cutouts Store power supply cord on Route cable through cutouts in cable cleat. the column and up to tablet. Cable Clips (self-adhesive style supplied with cart) Make sure column surface is clean and dry before installing cable clips.
Page 8
DocuSign Envelope ID: 26EA4BCC-6B8A-408A-AC15-D4FBCB359670 Tablet Release To remove the Kosmos Bridge, press the release button (located on the back of mount). Pivot and lift the Kosmos Bridge out of mount. Power cable will automatically disconnect from Kosmos Bridge. Release button is located on the backside within the right-side hand grip area.