EchoNous Uscan Setup Manual

ECHONOUS, INC
www.echonous.com
P005331-001 Rev A
9
Attach the charger to the multiple
socket outlet.
10
The tablet allows either the Linear
probe or the charger cable to be
connected. To scan with the Linear
probe, connect the Vein cable. To
charge the tablet, connect the charger
cable.
Connect the charger cable to the tablet
and connect the system power cord to
an AC socket to fully charge the system.
11
Place the plastic bin back into position.
12
Follow the on-screen setup wizard to
configure the tablet.
• Select Language.
• Setup Date and Time.
• Connect to Wi-Fi (Optional). Note:
A Wi-Fi connection is required
for automatic registration of the
system.
• Enter Registration Information.
TABLET SETUP GUIDE
The Uscan is for non-invasive imaging of the human body
and is intended for the following applications: Abdominal,
Musculoskeletal, Pediatric, and Small Organ. Users must
have ultrasound training for abdominal, musculoskeletal,
pediatric, and small organ imaging.
The Uscan can also be used to obtain an image of the
bladder that is used to automatically determine bladder
volume.
Refer to user manual before use.
Caution: Federal (USA) law restricts this
device to sale by or on the order of a
physician.
1
Remove the plastic bin at the back of
the stand.
2
Route the Vein USB cable down
through the stem of the stand, feeding
the Micro-B end first.