Table of Contents
Advertisement
3. Setup
AC Power
The Eve TF-20 X has a fixed voltage power supply, and it can work with an input voltage range of either
120 VAC, 60 Hz or 220 VAC, 50 Hz, depending on the specific model. To determine the product's power
requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to
the product's back panel, or refer to the product's specifications chart. The listed current rating indicates
the product's average current draw under normal conditions.
•
Always connect the product to a protected circuit (a circuit breaker or fuse).
Make sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by
unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
To eliminate wear and improve its lifespan, during periods of disuse completely
disconnect the product from power via breaker or by unplugging it.
AC Plug
This product can be connected to a dimmer or rheostat, by plugging in to a standard outlet controlled by a
dimmer or rheostat, or by splicing the power cable and connecting to the included track adapter.
Connection
AC Live
AC Neutral
AC Ground
Splicing to a commercial track lighting or dimmer setup should be completed by a
licensed professional.
4
Wire (U.S.)
Black
White
Green/Yellow
Wire (Europe)
Brown
Blue
Green/Yellow
Eve TF-20 X User Manual Rev. 1
Setup
Screw Color
Yellow/Brass
Silver
Green/Silver
Advertisement
Table of Contents
