Electronically published by Chauvet in the United States of America. Chauvet, Chauvet DJ, the Chauvet logo, and Gobo Zoom 2 are registered trademarks or trademarks of Chauvet & Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.
♦ Set this product on a flammable surface. Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document. Gobo Zoom 2 User Manual Rev. 2...
DMX IN POWER OUT POWER IN DMX OUT 100-240,VAC 50/60Hz Lens Bracket Power Power Fuse adjustment in/out holder knobs (2x) Product Dimensions 5.7 in 145 mm 13 in 6 in 330 mm 150 mm Gobo Zoom 2 User Manual Rev. 2...
3. Setup AC Power The Gobo Zoom 2 has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes. Orientation The Gobo Zoom 2 may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming.
Infrared mode Turns infrared on or off Configuration (DMX) The Gobo Zoom 2 works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer, which is available from the Chauvet website chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf. Personality and Starting Address The Gobo Zoom 2 uses 1 DMX channel, which defines the highest recommended address to 512.
DMX signals from the controller. Dimmer To adjust the dimmer intensity of the Gobo Zoom 2 via the menu, follow the instructions below. 1. Press <MENU> repeatedly until U-- shows on the display. 2. Press <ENTER>.
6. Softly drag any dirt or grime to the outside of the transparent surface. 7. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Gobo Zoom 2 User Manual Rev. 2...
For warranty terms and conditions and return information, please visit our website. For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration. For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration. Gobo Zoom 2 User Manual Rev. 2...