Bilge Drain Plug(S); Grab Handles; Rear Grab Handle (If So Equipped); Swim Platform - Sea-doo Sportster 1998 Operator's Manual

-
CAUTION
Improper opening of fuel valve(s)
may restrict flow of fuel. Make
sure valve(s) are fully opened
while running.

14) Bilge Drain Plug(s)

Should water be left in the bilge, it can
be easily drained by unscrewing these
plug(s) while on the trailer.
-
CAUTION
Remove jet boat from water prior
to unscrewing the drain plug(s).
Tilt the jet boat slightly to the rear so
that the water can completely flow out
of the bilge.
It is suggested to drain bilge when
trailer is on a ramp.
2
F04L92Y
TYPICAL
1. Drain plugs
2. Loosen
3. Tighten
32
1
3
WARNING
Always make sure bilge drain
plug(s) are properly tightened
prior to launching boat.

15) Grab Handles

Provides a handhold for the passen-
gers.
-
CAUTION
Never use the grab handles to
pull anything or to lift the jet
boat.
16) Rear Grab Handle
(if so equipped)
Provides a handhold for boarding
when needed.
-
CAUTION
Never use the grab handle to tow
anything or to lift the jet boat.

17) Swim Platform

Provides a large antiskid surface for
easy boarding from rear of jet boat.
WARNING
Engine(s) must be off when using
platform. Keep away from water
jet(s) or intake grate(s).
18) Operator/Rear
Passenger Seats
Each passenger must be seated while
underway.
WARNING
Allow no one to sit on edge of
boat or stand up while in opera-
tion.