Factory keyless entry alarm adapter security system (12 pages)
Summary of Contents for SECO-LARM ENFORCER E-931CS22RFCQ
Page 1
Wireless Entry Alert System E-931CS22RFCQ Installation Manual The ENFORCER Wireless Entry Alert System is a self-contained easy-to-install alert system for commercial or home applications. Each set contains a reflective photoelectric beam sensor that, when tripped, communicates wirelessly with a speaker installed up to 328ft (100m) away*. Additional speakers may be installed to alert more than one area on the property.
Page 2
3. Adjust the timer duration by turning the timer adjustment screw using the included screwdriver. Maximum clockwise sets the timer for 30 seconds; maximum counter-clockwise sets the timer for 3 seconds. NOTE: Timer mode only applies if Alarm is chosen as the alert tone. SECO-LARM U.S.A., Inc.
Page 3
2. Test the counter. Each time the beam is broken, the counter should automatically increase by 1. 3. Manually add or subtract 1 by pressing the "+" or "-" buttons 4. Reset the counter by pressing RESET. SECO-LARM U.S.A., Inc.
Page 4
SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship.