STEINEL NightmatIQ Manual page 50

Factory settings
– Twilight level: 1,000 lux
Twilight setting
The response threshold (twilight) can be infinitely varied
from approx. 1 to 1,000 lux.
– = twilight operating mode (approx. 1,000 lux)
– = twilight operating mode/night-time operating mode
(approx. 1 lux)
Bluetooth interconnection (Bluetooth mesh)
The sensor switch complies with the Bluetooth mesh
standard. It can be interconnected with all products com-
plying with the Bluetooth mesh standard.
The sensor switch is configured by Steinel Connect app.
Appropriate network keys are saved on the smartphone or
tablet the first time a connection is made between sensor
switch and Steinel Connect app. The key rules out any
unauthorised access to the sensor.
The network key must be shared for access via another
smartphone or tablet.
Switching times
Besides setting the twilight level, the app can also be used
for selecting times at which connected loads are switched
ON or OFF.
The NightmatIQ plus receives the current time of day via
the Bluetooth connection with a smartphone/tablet, and
uses this for future switching operations.
Any interruption in the power supply to the NightmatIQ
plus will result in the memorised time of day being lost.
The NightmatIQ plus determines an approximate time of
day on the basis of the sun's angle of incidence from the
past few days. To restore the exact time of day, you must
reconnect to the app.
– 23 –
Index