Installation - STEINEL NightmatIQ Manual

5. Installation

Hazard from electrical power.
Touching live parts can result in
electrical shock, burns or death.
• Switch OFF power and interrupt power supply.
• Using a voltage tester, check to make sure that the
power supply is disconnected.
• Make sure power supply remains interrupted.
Risk of damage to property!
Mixing up connection leads may produce
a short circuit.
• Identify connection leads.
• Connect the leads correctly.
Preparing for installation
• Check all components for damage. Do not use the
floodlight if it is damaged.
• Select an appropriate site to install the product.
– Vibration-free.
– Not in explosive atmospheres.
– Not on normally flammable surfaces.
– The unit must not be influenced by light
from the connected load.
– 10 –
Index