6.2 Main control board
6.2.1 Checking method
If the problem is probably caused by main control board, change it directly to confirm.
6.2.2 Removing the main control board
1. Unplug the appliance
2. Remove the screws by screwdriver and remove the electric box cover, as picture 1 and
picture 2.
3. Remove the screws by screwdriver as picture 3
3. Unplug the terminals on the main control board as picture 4.
4. Press the two snap-fits and remove the main control board as picture 5 and picture 6.
Picture1
Picture3
Picture5
Picture2
Picture4
Picture6
34