Safety Information; Preparation - Project Source ANIYA 17-0047-4W-PS Manual

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.
• Shut off water supply.
• Water should be completely drained from the main location water valve of faucet.
WARNING
• Handle with care.
• Improper care may cause the warranty to become invalid.
CAUTION
• Do not overtighten nuts.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Make sure the water supply valve is shut off before installation.
Clean any old wax, putty, etc. from base area (if replacing an existing sink).
Estimated Assembly Time: 60 minutes
Tools Required for Assembly (not included): Pipe Wrench, Carpenter's Level, Drill, Hacksaw, Jig Saw, Lavatory Water
Supply Kit, Measuring Tape, Pencil, Putty Knife, Screwdriver, Sealant, Adjustable Wrench
4