Download  Print this page

NEC PXSP2U Instruction Manual page 7

Nec pxsp2u: instruction manual
Hide thumbs
   

Advertisement

5
Fully tighten the four partially tightened screws.
*Push the speaker against the monitor while driving the screw.
R
5 0
L
R
5 0
Connecting the cords
Turn off the power of all connected units before connecting the cords.
Connect the monitor's SPEAKER R and L
terminals with the speakers' terminals using the
included connection cords.
R
5 0
L
R
5 0
RIGHT
LEFT
Cord Clamper
Peel off the protective tape from the back of the clamper, then
mount the clamper in the desired position and clamp the cords
together.
L
5 0
R
L
5 0
WARNING
● Do not move the monitor by holding onto the speakers which
have been mounted to the monitor.
This could cause the monitor to fall and result in injury.
Fasten the screws securely. Failing to do so could cause the
speakers to fall and result in injury.
There is polarity
connection cord.
Connect each conductor to the correct terminal.
L
5 0
R
L
5 0
Hold down the button of the speaker terminal with
your finger, insert the conductor of the connection
cable, and release your finger.
7
with the conductor of each
+ −
Black
Red

Advertisement

Table of Contents
loading

  Related Manuals for NEC PXSP2U

This manual is also suitable for:

Px-50xr5aPx-61xr4aPxsp2u/bPxsp2u/s