Advertisement
Mounting to a 42-inch Plasma Monitor
The speakers are marked R for use on the right side and L for use on the left side.
At the time of mounting, check for the letter R or L appearing on the label at the back of the speaker, and on the
mounting fittings.
1
Attach the cushions to the sides of the speakers in the positions
indicated on the diagram.
R
3
Partially tighten the included M8 X 18 screws in the screw
holes on the top of the monitor.
L
Cushions
M8×18
4
2
Arrange the speakers as illustrated in the diagram below
(so that the speaker terminals are at the bottom).
Attach the R mounting fitting to the speaker having an R
marked on the speaker label.
Attach so that the guide pins of the speaker enter the
holes of the mounting fitting as illustrated in the diagram
below. Fasten with the included M4 X 10 screws.
M4 x 10
R
R
Speaker terminal
Guide pins
4
Hook the mounting fittings of the top portion of the
speaker to the provisionally fastened screws. Next, align
the holes of the speaker mounting fitting with the screw
holes located at the bottom of the monitor and
provisionally fasten with the included M8 X 18 screws.
R
4 2
R
4 2
L
R
4 2
R
4 2
L
L
Speaker terminal
R
L
4 2
R
L
4 2
L
Advertisement
