INSTRUCTION MANUAL PXT-42SPKR PLASMA DISPLAY TV SPEAKER Thank you for purchasing NEC Plasma Display TV Speakers. These speakers are specifically designed only for use with NEC Plasma Display TV (PXT-42S11S). To ensure the safe operation of the unit, please read these instructions before installing.
TABLE OF CONTENTS 1. Check for enclosed parts ......2 2. Important Safety Instructions ...... 3 3. Assembling Instructions ......5 Using speakers when attached to the plasma display 2) Using speakers on its own stand...
PLASMA DISPLAY SPEAKER 1. PLEASE CHECK THE FOLLOWING ITEMS SHOWN BELOW SPEAKER STAND M5 SCREWS VIBRATION ABSORBENT SPONGE (16) SPECIAL SCREWS SPEAKER WIRES / ROUND HEAD SCREWS FIXED BRACKETS CLAMP WIRE...
2. IMPORTANT SAFETY INSTRUCTIONS PLEASE FOLLOW THESE INSTRUCTIONS FOR YOUR SAFETY PLEASE KEEP THESE INSTRUCTIONS FOR YOUR SAFETY AND TO PREVENT ANY DAMAGE TO THIS UNIT. WARNING : Disregarding these instructions can result in serious injury. WARNING CAUTION : Disregarding these instructions will result in the mistreatment of the unit and can result in injury or damage to the unit.
PLASMA DISPLAY SPEAKER PLEASE FOLLOW THESE SAFETY PRECAUTIONS WHEN INSTALLING OR HANDLING When assembling, be sure to use the enclosed Please be careful not to stain the speakers with parts and make sure all parts are tightly any gas or oil. screwed as instructed.
3. ASSEMBLING INSTRUCTIONS USING SPEAKERS WHEN ATTACHED TO THE PLASMA DISPLAY ATTACHING VIBRATION ABSORBENT SPONGES TO SPEAKERS Clean the surface with soft, lint-free cloth Attach the sponge to the side of the where sponges will be attached. speaker that will be attached to the plasma display.
PLASMA DISPLAY SPEAKER INSTALLING SPEAKERS TO THE PLASMA DISPLAY Place a protective covering over the surface you will be working on and lay the plasma display as shown below. . Take the speakers with fixed brackets to the back of the plasma display. Place the hooks onto the fixed brackets to the squared holes in the back of the plasma display.
CONNECTING SPEAKER WIRES Take the speaker wire(2) and use the red cord to connect to and from (+) inputs, and use the black cord to connect to and from (-) inputs. Note Please be sure to connect red cord with (+) and black with (-); otherwise, speakers will not produce clear sounds.
PLASMA DISPLAY SPEAKER INSTALLING SPEAKERS TO ITS OWN STAND OR UNINSTALLING SPEAKERS FROM ITS OWN STAND INSTALLING SPEAKERS TO ITS OWN STAND. Please be sure to have the vibration absorbent sponge onto the side of Use a coin to secure the speaker where the the special screws stand will be attached.