Menu Shortcut
Auto Pause
M82
An automatic pause can be inserted between sets of digits in a
similar manner as manual pauses. To enter automatic pause
marks, enter in the telephone number; press
(comma) is displayed after the phone number. Enter in the next
set of digits. If necessary, press
automatic pause and then enter in the next set of digits. When
the automated system telephone number is dialed, your phone
waits approximately three seconds at each automatic pause
mark and then automatically transmits the remaining sets of dig-
its.
Link to Phone Book
If the total number of digits needed to access an automated tele-
phone system exceeds the maximum 26 digits that can be trans-
mitted at one time (or stored in each phone book location), the
phone number can be entered and then linked to a phone book
location containing the remaining strings of numbers. To link a
phone number to a phone book record location, key in the phone
M83
number and press
phone book location (1-99) containing the applicable informa-
S
tion. Press
to dial the phone number. After the phone num-
ber is dialed, the following message is displayed indicating that
the remaining sets of digits must be sent manually be pressing
S
.
Press SND For Manual Pause Dial
9. Mute
The Mute Menu can be accessed by pressing
conversation. The Mute Menu is displayed below.
S e t
1 .M i c
2 .A l l
3 .U n m u t e
Menu Shortcut
Mic Mute
M91
The phone microphone can be turned off or muted during a con-
versation. With a call in progress, press
M93
to turn on the microphone again.
M82
M82
to insert another
Menu Shortcut
M83
; an "L" is displayed. Enter the
Menu Shortcut
M9
M9
m u t e
M u t e
M u t e
M91
30
-
-
. A ","
during a
. Press