Charging The Battery; Nicd And Nimh Battery Charging Times; Voice Mail Messaging & Text Messaging; Phone Password - NEC DigitalTalk MAX 2100 Owner's Manual

Charging the Battery

A new phone battery must be fully charged before being
used for the first time. The phone battery can be charged
through one of two setups.
Setup 1: Phone & AC Adapter
Only
Plug the AC adapter
into a standard AC
electrical outlet. Insert
the adapter plug into
the jack located on the
side of the phone.
Setup 2: Phone, AC Adapter,
&Charging Stand
Plug the AC adapter
into a standard AC
electrical outlet. Insert
the adapter plug into
the charging stand
jack. Place the phone
in the charging stand.
The red LED indicator
on the charging stand
illuminates while the
battery is charging.
NiCd and NiMH Battery
Charging Times
With Standard Charger
NiCd ~10-12 hours
NiMH ~15 hours
Voice Mail Messaging & Text Messaging
Voice mail messaging and text messaging services, when avail-
able, are provided by your cellular service provider. Before you
can receive either voice or text messages with your phone, you
must subscribe to these cellular service provider options. Con-
tact your cellular service provider for information on availability
and setup of these services. See "Voice Messages" on page 14
and "Text Messages" on page 15 for information on retrieving
messages.

Phone Password

When your phone is activated, a 4-digit password is programmed
into the unit. The password locks and unlocks your phone, and
provides access to restricted phone settings. Check with your
cellular service provider for information on your security pass-
word.
With Rapid Charger
~ 1.5 hours
~ 1.5 hours
2
- -