Advertisement
VS-DT6
<Front panel assembly section>
Remove the bottom panel.
Remove the top panel.
Remove the CD mechanism assembly.
Remove the front panel assembly.
Removing the switch board
From the back side of the front panel assembly,
remove the four screws R attaching the switch
board.
Removing the open/close board
1.
From the back side of the front panel assembly,
remove the two screws S attaching the door motor
assembly.
2.
Remove the screw T attaching the open/close
board of the door motor assembly.
Removing the door motor (See Fig. 15.)
Remove the door motor assembly.
1.
Remove the stop washers attaching the clutch
assembly and gear 2.
2.
Remove the clutch assembly, washer and Gear 2.
3.
Remove the two screws W attaching the door
motor.
Removing the front board
1.
While widening section f of the front base in the
direction of the arrow, remove the rod gear
assembly.
2.
Slide the moving panel assembly all the way in the
direction of the arrow.
3.
While slightly widening sections g toward the front,
take out the moving panel assembly in the direction
of the arrow.
4.
Remove the two screws X attaching the moving
base of the moving panel assembly.
5.
Disengage the engagement sections h on the
inside of the moving base and at the inside of the
moving panel assembly and remove the moving
base.
6.
Remove the screw Y and screw Y' attaching the
front board.
7.
Disengage the claws i of the moving panel and
remove the front board.
[Reference]
Before attaching the moving base, pass the
card wire of the front board through the hole
on the moving base. (See Fig.18.)
When attaching the screw Y', attach the wire
at the same time.
1-10
(See Fig. 14.)
(See Figs. 14 and 15.)
(See Figs. 16 to 19.)
Door motor assembly
S
Front panel assembly
(Back side)
Fig.14
Door motor
Clutch assembly
Washer
Stop washer
Gear 2
Fig.15
Front panel assembly
(Back side)
Fig.16
Fig.17
X
h
Fig.18
Y
Fig.19
R
Switch board
W
T
Open/close
board
Door motor assembly
Rod gear assembly
f
Front base
g
Front base
Moving panel assembly
Moving base
h
Card wire
Hole
Front board
i
Wire
Y'
Moving panel
Advertisement
