sparkfun ZED-F9P Hook-Up Manual page 4

GPS/GNSS Magnetic Mount Antenna - 3m
(SMA)
 GPS-14986
GPS Antenna Accessories
You can use the GPS antenna ground plate to improve your GPS antenna's performance. If you are using the
GNSS Multi-Band L1/L2 Surveying Antenna (TNC) - TOP106, you'll need to grab the interface cable.
Interface Cable - SMA Male to TNC Male
(300mm)
 CAB-17833
Accessories
At a minimum, you will need a USB C cable to power and program the boards. Depending on your application, you
may want to grab a Qwiic cable to connect a Qwiic-enabled device.
SparkFun Qwiic Cable Kit
 KIT-15081
Tools
You will need a screw driver to tighten the screw between the processor board and carrier board.
GPS/GNSS Embedded Antenna - 1m (SMA)
 GPS-14987
GPS Antenna Ground Plate
 GPS-17519
USB 3.1 Cable A to C - 3 Foot
 CAB-14743