sparkfun ZED-F9P Hook-Up Manual page 2

MicroMod GNSS Carrier Board (ZED-F9P) Wishlist
SparkFun Mini Screwdriver
TOL-09146
This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin c...
GPS Antenna Ground Plate
GPS-17519
(2) USB 3.1 Cable A to C - 3 Foot
CAB-14743
MagmaX2 Active Multiband GNSS Magnetic Mount Antenna - AA.200
GPS-17108
SparkFun MicroMod GNSS Carrier Board (ZED-F9P)
GPS-17722
SparkFun MicroMod ESP32 Processor
WRL-16781
MicroMod Processor Board
You'll need a Processor Board with the MicroMod GNSS Carrier Board. We recommend using the MicroMod
ESP32 Processor to connect to the cloud. Depending on your setup, you may need a transceiver to pass the
correction data.
SparkFun MicroMod ESP32 Processor
 WRL-16781
SparkFun Wish List
SparkFun MicroMod Teensy Processor
 DEV-16402