Advertisement
Installation
A
A. Shut off water supply at the valves.
Remove old faucet and clean the
mounting surface for installation of new
faucet.
D
13
27
D. Install counter weight (27) onto pull
out hose (13). Connect the pull out
hose to water inlet tube (25). Be sure
to install rubber washer (26). Do not
overtighten the connection.
F
F. Turn on water supply to check for
leaks at all connection. Remove spray
head from the pull out hose and let the
water run for about 1 minute and check
for leaks. Reattach the spray head.
B
B. Insert the hoses and shank through
the hole. The faucet hole on the mount-
ing surface should be 1 1/2" in diameter.
E1
25
26
13
E1. Apply Teflon (TPFE) tape on the shut
off valves. Thread the tape in counter-
clockwise direction.
14
15
16
17
18
19
20
21
22
23
24
C
C. Remove the 2 screws (24) from lock-
ing nut (23). From under the sink, install
the rubber washer (21), steel washer
(22) and locking nut (23) onto the
shank (20) Tighten the locking nut with
a basin wrench or the socket tool and
install the 2 screws (24) to secure the
faucet in place.
E2
E2. Use an adjustable wrench to tighten
the water supply hoses, please do not
overtighten the connections.
10
09
13
08
12
11
01
02
03
04
05
06
07
25
28
26
27
4
20
21
22
23
24
Flexible water supply line
01. Temperature Indicator
02. Setscrew
03. Handle
04. Cap
05. Bonnet
06. Cartridge
07. Seat
08. Sprayer Head
09. Check Valve
10. Washer
11. Sprayer Connector
12. Retainer
13. Pull Out Hose
14. Spout
15. O Ring
16. Locking Ring
17. Body
18. Flange
19. EVA Washer
20. Shank
21. Rubber Washer
22. Steel Washer
23. Locking Nut
24. Screws (x2)
25. Water Inlet Tube
26. Rubber Washer
27. Counter Weight
28. Water Supply Hoses
DS Rev.4 06/2017
Advertisement
