Application Planning; Transportation; Storage Requirements; Unpack And Check The Delivered Equipment - Delta DIAVH-IPC003100 User Manual

Table of Contents

Advertisement

DELTA DIAVH-IPC00X100 User Manual

2.1 Transportation

Well-packaged products are suited for transportation by truck, ship, and plane. During transportation,
products should not be put in open cabin or carriage. During transshipping, products should not be stored
in open air without protection from the atmospheric conditions. Products should not be transported together
with inflammable, explosive and corrosive substances and are not allowed to be exposed to rain, snow and
liquid substances and mechanical force.

2.2 Storage Requirements

Products should be stored in package box when it is not used. And warehouse temperature should be -
O
O
20
C~70
C, and relative humidity should be 20% ~ 85%. In the warehouse, there should be no harmful
gas, inflammable, explosive products, and corrosive chemical products, and strong mechanical vibration,
shock and strong magnetic field interference. The package box should be at least 10cm above ground, and
50cm away from wall, thermal source, window and air inlet

2.3 Unpack and check the delivered equipment

Unpack the equipment
Pay attention to the following things when you unpack the equipment.
Please take the advice not to throw away the original packaging material and please retain to
use it when the equipment should be transported again.
Please put the document in a safe place. It will be used in the initial adjustment of equipment
and it is a part of the equipment.
When you check the delivered equipment, please check whether it is obviously damaged
during the transportation.
Please check whether the delivered parcel includes the whole equipment and the accessories
you ordered separately. If there is any discrepancy or damaged during transportation, please
contact our customer-service staff.

Application Planning

Caution!
Risk of destroying the device!
When shipping the PC in cold weather, please pay attention to the
extreme temperature variation. Under this circumstance, please make
sure no water drop (condensation) is formed on the surface or interior
of the device. If condensation is formed on the device, please wait for
over twelve hours before connecting the device.
Page 7 of 22

Advertisement

Table of Contents
loading

Table of Contents