➐ Adjusting Volume Up & Down; ❽ Turning Off The Projector - NEC NP43 User Manual

➐ Adjusting Volume Up & Down
Sound level from the speaker on the projector can be adjusted.
Another way to adjust volume is to use the menu.
Select [ADJUST] → [BASIC] → [VOLUME] from the menu.
NOTE: The [BEEP] sound volume cannot be adjusted. To turn off the [BEEP] sound, from the menu, select [SETUP] → [OPTIONS (1)]
→ [BEEP] → [OFF].
❽ Turning off the Projector
To turn off the projector:
First, press the POWER (ON/STAND BY) button on the
projector cabinet or the POWER OFF button on the re-
mote control. The "POWER OFF / ARE YOU SURE? /CAR-
BON SAVINGS- SESSION X.XXX[g-CO2]" message will
appear.
Secondly, press the ENTER button or press the POWER
(ON/STAND BY) or the POWER OFF button again.
The power indicator will glow orange.
CAUTION:
Parts of the projector may become temporarily heated if the AC power supply is disconnected either during nor-
mal projector operation or during cooling fan operation. Use caution when picking up the projector.
NOTE:
• The projector cannot be turned off with the ON/STAND BY button or the POWER OFF button while the POWER indicator is
flashing green in a cycle of 0.5 second on and 0.5 second off.
• Do not disconnect the AC power supply to the projector for 60 seconds immediately after turning it on and displaying an im-
age.
• Do not turn off the projector using the "Direct Power Off" function within 10 seconds of making adjustment or setting chang-
es and closing the menu. Doing so can cause loss of adjustments and settings.
3. Projecting an Image (Basic Operation)
LAMP
STATUS
POWER
FOCUS
ON/STAND BY
Power On
LAMP
STATUS
POWER
Steady green light
28
AUTO
ADJ.
＋
Fan running
LAMP
STATUS
POWER
Blinking Steady green/
orange light orange light
Standby
LAMP
STATUS
POWER