Connecting The Supplied Power Cable - NEC NP43 User Manual

Connecting the Supplied Power Cable

Connect the supplied power cable to the projector.
First connect the supplied power cable's three-pin plug to the AC IN of the projector, and then connect the other
plug of the supplied power cable in the wall outlet.
The projector will go into standby
mode. When in standby mode, the
POWER indicator will light orange
and the STATUS indicator will light
green when [NORMAL] is selected
for [STANDBY MODE].
CAUTION:
Parts of the projector may become temporarily heated if the AC power supply is disconnected either during
normal projector operation or during cooling fan operation. Use caution when picking up the projector.
To wall outlet
Make sure that the prongs are fully inserted into both
the power plug and the wall outlet.
2. Installation and Connections
15