➎ Correcting Keystone Distortion Manually - NEC NP43 User Manual

➎ Correcting Keystone Distortion Manually
You can also correct the vertical keystone distortion manually.
NOTE:
• Keystone correction by using the ▲/▼ button is not possible when [VIEWER] is selected for the source.
• The vertical keystone angle can be corrected between 40 degrees upward and 40 degrees downward from level.
Adjust the keystone distortion manually in the following cases:
• To fine tune Keystone correction even after performing the [AUTO KEYSTONE] adjustment
• When the menu setting for [AUTO KEYSTONE] is turned off
Adjusting with buttons on the cabinet
1. Press the ▲ or ▼ button with no menus displayed.
The slide bar will be displayed for your adjustment.
2. Use the  or  to correct the keystone distortion.
Adjust so that the right and left sides are parallel.
3. Press the EXIT button.
The slide bar will be closed.
3. Projecting an Image (Basic Operation)
LAMP
STATUS
POWER
25
AUTO
SOURCE
ADJ.
FOCUS
ON/STAND BY