➎ Correcting Keystone Distortion Manually - NEC NP41 User Manual

➎ Correcting Keystone Distortion Manually
You can also correct the vertical keystone distortion manually.
NOTE:
• Manual keystone correction is not available when there is no signal received by any input.
• The vertical keystone angle can be corrected between 40 degrees upward and 40 degrees downward from level.
Adjust the keystone distortion manually in the following cases:
• To fine tune Keystone correction even after performing the [AUTO KEYSTONE] adjustment
• When the menu setting for [AUTO KEYSTONE] is turned off
Adjustng wth buttons on the cabnet
1. Press the seleCt ▲ or ▼ button with no menus dis-
played.
The slide bar will be displayed for your adjustment.
2. Press the eXit button.
The slide bar will be closed.
Adjustng wth the remote control
1. Press the MenU button.
The menu will be displayed.
2. Press the seleCt ▶ button to select [setUP] and
press the enter button.
The [GENERAL] screen will be displayed.
3. Press the seleCt ▼ button to select [KeYstOne].
3. Projectng an Image (Basc Operaton)
LAMP
STATUS
POWER

AUTO
SELECT
SOURCE
ADJ.
FOCUS
ON/STAND BY