Connecting The Supplied Power Cable - NEC NP600 User Manual

Connecting the Supplied Power Cable

Connect the supplied power cable to the projector.
First connect the supplied power cable's two-pin plug to the AC IN of the projector, and then connect the other plug
of the supplied power cable in the wall outlet.
To wall outlet ←
CAUTION:
Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while
the projector is turned on and immediately after the projector is turned off.
SOURCE AUTO ADJ.
Make sure that the prongs are fully inserted into both
the AC IN and the wall outlet.

2. Installation and Connections
LAMP
STATUS