Download Print this page
Mercia Garden Products 02DTSHPN0606SFD2W-V1-PEFC General Instructions Manual

Mercia Garden Products 02DTSHPN0606SFD2W-V1-PEFC General Instructions Manual

6x6 pent playhouse

Advertisement

Quick Links

General Instructions
02DTSHPN0606SFD2W-V1-PEFC
6x6 Pent Playhouse
BEFORE YOU START PLEASE READ THE INSTRUCTIONS CAREFULLY
- Check the pack and make sure you have all the parts listed in the parts list provided.
- When you are ready to start, make sure you have the right tools at hand (not supplied) including a Phillips screw-
driver, Flathead screwdriver, Stanley knife, Wood saw, Step ladder, Hammer, Spirit level and a Drill with 2mm bit.
- Ensure there is plenty of space and a clean dry area for assembly.
- Ensure you have enough time to build the product to ensure the building is water tight.
TIMBER
As with all natural materials, timber can be a ected during various weather conditions. For the duration of heavy
or extended periods of rain, swelling of the wood panels may occur. Warping of the wood may also occur during
excessive dry spells due to natural processes. Unfortunately, these processes cannot be avoided but can be
helped. It is suggested that the outdoor building is sprayed with water during extended periods of hot weather
and sheltered as much as possible during rain or snow.
Our buildings are pre treated with a water based treatment**; this only helps to prevent discolouration
whilst in stock. To validate your guarantee and ensure longevity of the product, it is ESSENTIAL the
building is treated with a suitable preservative in accordance with the manufacturers recommendations.
Care must be taken to ensure the product is placed on a suitable base.
We recommended using a suitable protection for your playhouse. As the product is destined for use by
children, a water based treatment for childrens toys is ESSENTIAL.
We also recommend treating the building prior to construction.
POSITIONING YOUR PLAYHOUSE
When thinking about where the building and base is going to be constructed:
Ensure that there will be access to all sides for maintenance work and annual treatment.
We recommend a minimum space of 2m around a playhouse, away from any structure or obstructions such as
fences, garages, houses, overhanging branches, washing lines or electrical wires.
It is recommended that the position of the Playhouse is not in direct sunlight.
Activity toys such as swings and slides for towers shall not be installed over concrete, asphalt or any hard
surface.
BUILDING A BASE
Ensure the base is level and is built on rm ground, to prevent distortion, checking with a spirit level. Refer to
diagrams for the base dimensions. The base should be slightly smaller than the external measurement of the
building, i.e. The cladding should overlap the base, creating a run o for water. It is also recommended that the
oor be at least 25mm above the surrounding ground level to avoid ooding.
TYPES OF BASE
- Concrete 75mm laid on top of 75mm hard-core.
- Slabs laid on 50mm of sharp sand.
- Wooden base.
WARNING: Only for domestic use
Not suitable for children under 36 months due to
small gaps and danger of falling from heights.
To be used under direct supervision of an adult
Please retain product label and instructions for future reference
WARNING
ONLY SUITABLE FOR DOMESTIC USE.
!
TO BE USED UNDER DIRECT SUPERVISION OF AN ADULT.
THIS PRODUCT SHOULD NOT BE MODIFIED IN ANY WAY. ANY MODIFICATIONS SHOULD BE
DETERMINED BY THE MANUFACTURER AND CARRIED OUT ACCORDING TO THE INSTRUCTIONS.
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY COMPONENT PARTS PRIOR TO ASSEMBLY.
MAX AGE OF 14 YEARS.
THIS TOY IS FOR OUTDOOR USE ONLY.
USE A WATER BASED TREATMENT THAT IS EN71 TESTED
CAUTION
Wood is a natural product and can change post manufacture. So despite every e ort being
made to ensure the material used are cut and machined to a clean and smooth nish, care
must be taken when handling the product and preparing for use by your child.
Any areas of concern, in the play areas, can be rubbed over with sandpaper to achieve a
smoother nish. Alternatively, call the customer service department who will be happy to
arrange replacement panels/parts.
x2
All buildings should be erected by
atleast two adults.
DO NOT ALLOW
CHILDREN TO ASSIST.
To prevent damage during
assembly, you MUST pilot
drill all screw holes and
ensure all screw heads are
2mm Drill bit
countersunk.
12mm CSK
Whilst all products manufactured are made to the highest standards of Safety and in the case of childrens products
independently tested to EN71, we cannot accept responsibility for your safety whilst erecting this product.
**Protim Aquatan T5 (621)**
Your building has been dip treated with Aquatan.
Aquatan is a water-based concentrate which is diluted with water, the building has been treated by the
correct application of Aquatan solution and then allowed to dry.
Aquatan is a decorative nish to colour the wood, which is applied industrially to timber fence panels and
garden buildings.
Aquatan undiluted contains: boric acid, sodium hydroxide 32% solution, aqueos mixture of sodium
dioctyl sulphosuccinat and alcohols: 2, 4, 6-trichlorophenol.
In all instances for assistance with your product, please contact customer care on :
01636 821215 or customerservice@merciagp.co.uk
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
Winter = High Moisture = Expansion
Summer = Low Moisture = Contraction
For ease of assembly, you will
need a tape measure to check
dimensions of components.
www.merciagardenproducts.co.uk
P1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 02DTSHPN0606SFD2W-V1-PEFC and is the answer not in the manual?

Questions and answers

Summary of Contents for Mercia Garden Products 02DTSHPN0606SFD2W-V1-PEFC

  • Page 1 In all instances for assistance with your product, please contact customer care on : 01636 821215 or customerservice@merciagp.co.uk TYPES OF BASE - Concrete 75mm laid on top of 75mm hard-core. Mercia Garden Products Limited, - Slabs laid on 50mm of sharp sand. Sutton On Trent, - Wooden base.
  • Page 2 Take a look at the di erent playhouse options below which refers to the instruction lea ets required to build each option. Model Build Instructions Required 6x6 Pent Playhouse 02DTSHPN0606SFD2W-V1-PEFC (Playhouse) SI-002-001-0072 6x6 Pent Playhouse, Tower, Slide & Swing 6x6 Pent Playhouse & Tower 02DTSHPN0606SFD2W-V1-PEFC (Playhouse)
  • Page 3 02DTSHPN0606SFD2W-V1-PEFC Please retain product label and instructions for future reference Look for the symbols and follow the safety guidlines below. Ensure screw heads are sub ush and Ensure the screws are 12mm gap sand down any xed squarely and do surrounding the splinters created.
  • Page 4 Please retain product label and instructions for future reference Pre Assembly Step 1 Parts needed - & & Before assembling remove the transportation Pre drill blocks from the bottom of each panel. hole Fix the Window Blocks (No. 17) to the Windows (No.
  • Page 5 Please retain product label and instructions for future reference Please retain product label and instructions for future reference Step 2 Step 3 Parts needed - & & & Parts needed - Pre drill hole Flip the Door Panel (No. 1) over so Place the Floor (No.5) on to a rm and level the boards are facing upwards and place the base, ensure base has suitable drainage free...
  • Page 6 Please retain product label and instructions for future reference Step 5 Step 6 Parts needed - & Parts needed - & Pre drill 50kg Pre drill hole hole Place the Door Panel (No.1) and the Left Locate the Roof (No.6) on top of Gable (No.3) on top of the oor, ensuring the playhouse, ensuring the central roof the panels are positioned centrally on...
  • Page 7 Please retain product label and instructions for future reference Step 8 Step 7 Pre drill Cut the felt (No. 19) into 2 sheets Once the roof is tted and the building hole measuring: 1900mm (L) X 1000mm is square, secure the building to the (W) and lay onto roof.
  • Page 8 Please retain product label and instructions for future reference Step 9 Step 10 Parts needed - & Parts needed - & Pre drill Pre drill hole hole Locate the Cover Trims (No. 11) Locate the Fascia (No.9) to the onto the back of the playhouse. Fix front of the building.
  • Page 9 Please retain product label and instructions for future reference Step 11 Parts needed - & & Pre drill hole Locate the Wooden Door Handle It is ESSENTIAL that you apply wood (No. 16) onto the outside of the door. treatment immediately after the building Fix in place by hand, screwing through has been assembled.
  • Page 11 REGISTER FOR YOUR PLEASE SCAN HERE: ANTI-ROT GUARANTEE TODAY...