Download Print this page
Mercia Garden Products 02DTTWR0707-V1-PEFC General Instructions Manual

Mercia Garden Products 02DTTWR0707-V1-PEFC General Instructions Manual

7x7 playhouse tower

Advertisement

Quick Links

General Instructions
02DTTWR0707-V1-PEFC
7x7 Playhouse Tower
BEFORE YOU START PLEASE READ THE INSTRUCTIONS CAREFULLY
- Check the pack and make sure you have all the parts listed in the parts list provided.
- When you are ready to start, make sure you have the right tools at hand (not supplied) including a Phillips screw-
driver, Flathead screwdriver, Stanley knife, Wood saw, Step ladder, Hammer, Spirit level and a Drill with 2mm bit.
- Ensure there is plenty of space and a clean dry area for assembly.
- Ensure you have enough time to build the product to ensure the building is water tight.
TIMBER
As with all natural materials, timber can be a ected during various weather conditions. For the duration of heavy
or extended periods of rain, swelling of the wood panels may occur. Warping of the wood may also occur during
excessive dry spells due to natural processes. Unfortunately, these processes cannot be avoided but can be
helped. It is suggested that the outdoor building is sprayed with water during extended periods of hot weather
and sheltered as much as possible during rain or snow.
Our buildings are pre treated with a water based treatment**; this only helps to prevent discolouration
whilst in stock. To validate your guarantee and ensure longevity of the product, it is ESSENTIAL the
building is treated with a suitable preservative in accordance with the manufacturers recommendations.
Care must be taken to ensure the product is placed on a suitable base.
We recommended using a suitable protection for your playhouse. As the product is destined for use by
children, a water based treatment for childrens toys is ESSENTIAL.
We also recommend treating the building prior to construction.
POSITIONING YOUR PLAYHOUSE
When thinking about where the building and base is going to be constructed:
Ensure that there will be access to all sides for maintenance work and annual treatment.
We recommend a minimum space of 2m around a playhouse, away from any structure or obstructions such as
fences, garages, houses, overhanging branches, washing lines or electrical wires.
It is recommended that the position of the Playhouse is not in direct sunlight.
Activity toys such as swings and slides for towers shall not be installed over concrete, asphalt or any hard
surface.
BUILDING A BASE
Ensure the base is level and is built on rm ground, to prevent distortion, checking with a spirit level. Refer to
diagrams for the base dimensions. The base should be slightly smaller than the external measurement of the
building, i.e. The cladding should overlap the base, creating a run o for water. It is also recommended that the
oor be at least 25mm above the surrounding ground level to avoid ooding.
TYPES OF BASE
- Concrete 75mm laid on top of 75mm hard-core.
- Slabs laid on 50mm of sharp sand.
- Wooden base.
WARNING: Only for domestic use
Not suitable for children under 36 months due to
small gaps and danger of falling from heights.
To be used under direct supervision of an adult
Please retain product label and instructions for future reference
WARNING
ONLY SUITABLE FOR DOMESTIC USE.
!
TO BE USED UNDER DIRECT SUPERVISION OF AN ADULT.
THIS PRODUCT SHOULD NOT BE MODIFIED IN ANY WAY. ANY MODIFICATIONS SHOULD BE
DETERMINED BY THE MANUFACTURER AND CARRIED OUT ACCORDING TO THE INSTRUCTIONS.
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY COMPONENT PARTS PRIOR TO ASSEMBLY.
MAX AGE OF 14 YEARS.
THIS TOY IS FOR OUTDOOR USE ONLY.
USE A WATER BASED TREATMENT THAT IS EN71 TESTED
CAUTION
Wood is a natural product and can change post manufacture. So despite every e ort being
made to ensure the material used are cut and machined to a clean and smooth nish, care
must be taken when handling the product and preparing for use by your child.
Any areas of concern, in the play areas, can be rubbed over with sandpaper to achieve a
smoother nish. Alternatively, call the customer service department who will be happy to
arrange replacement panels/parts.
x2
All buildings should be erected by
atleast two adults.
DO NOT ALLOW
CHILDREN TO ASSIST.
To prevent damage during
assembly, you MUST pilot
drill all screw holes and
ensure all screw heads are
2mm Drill bit
countersunk.
12mm CSK
Whilst all products manufactured are made to the highest standards of Safety and in the case of childrens products
independently tested to EN71, we cannot accept responsibility for your safety whilst erecting this product.
**Protim Aquatan T5 (621)**
Your building has been dip treated with Aquatan.
Aquatan is a water-based concentrate which is diluted with water, the building has been treated by the
correct application of Aquatan solution and then allowed to dry.
Aquatan is a decorative nish to colour the wood, which is applied industrially to timber fence panels and
garden buildings.
Aquatan undiluted contains: boric acid, sodium hydroxide 32% solution, aqueos mixture of sodium dioctyl
sulphosuccinat and alcohols: 2, 4, 6-trichlorophenol.
In all instances for assistance with your product, please contact customer care on :
01636 821215 or customerservice@merciagp.co.uk
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
Winter = High Moisture = Expansion
Summer = Low Moisture = Contraction
For ease of assembly, you will
need a tape measure to check
dimensions of components.
www.merciagardenproducts.co.uk
P1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 02DTTWR0707-V1-PEFC and is the answer not in the manual?

Questions and answers

Summary of Contents for Mercia Garden Products 02DTTWR0707-V1-PEFC

  • Page 1 In all instances for assistance with your product, please contact customer care on : 01636 821215 or customerservice@merciagp.co.uk TYPES OF BASE - Concrete 75mm laid on top of 75mm hard-core. Mercia Garden Products Limited, - Slabs laid on 50mm of sharp sand. Sutton On Trent, - Wooden base.
  • Page 2 Build Instructions Required 6x6 Apex Playhouse & Tower 02DTSHAX0606SFD2W-V1-PEFC (Playhouse) 6x6 Pent Playhouse & Tower 02DTSHPN0606SFD2W-V1-PEFC (Playhouse) SI-002-001-0041 SI-002-001-0114 02DTTWR0707-V1-PEFC (Tower) 02DTTWR0707-V1-PEFC (Tower) 02DTSHAX0606SFD2W-V1-PEFC (Playhouse) 02DTSHPN0606SFD2W-V1-PEFC (Playhouse) 6x6 Apex Playhouse, Tower & Slide 6x6 Pent Playhouse, Tower & Slide SI-002-001-0042...
  • Page 3 Please retain product label and instructions for future reference Tower Set Up Options: Take a look at the di erent set ups below and decide which you wish to construct. SET UP 1 SET UP 3 SET UP 5 SET UP 7 (If purchased a slide) (If purchased a slide) (If purchased an Activity set)
  • Page 4 02DTTWR0707-V1-PEFC Please retain product label and instructions for future reference Look for the symbols and follow the safety guidlines below. Ensure screw heads are sub ush and Ensure the screws are 12mm gap sand down any xed squarely and do surrounding the splinters created.
  • Page 5 Please retain product label and instructions for future reference Pre Assembly Before assembling remove the transportation blocks from the bottom of each panel. Take care removing the blocks as to not damage the panels. Tap with a at headed screwdriver and hammer.
  • Page 6 Please retain product label and instructions for future reference Step 3 Step 1 Part needed - & Part needed - & Pre drill Pre drill hole hole Place the Tower Base (No.1) onto a at and Locate the Floor Panels (No. 7 & 8) level surface.
  • Page 7 Please retain product label and instructions for future reference Step 5 Step 6 Parts needed - & & Pre drill The platform is ready for the hole With the assembled Platform resting on assembly of the playhouse on top. one side, secure one of the Rear Posts (No.10) to 50kg the back of the platform.
  • Page 8 Please retain product label and instructions for future reference Step 10 Step 8 Parts needed - Parts needed - Pre drill Pre drill Pre drill hole hole hole Locate the Long Rail (No.4) into the gap Locate the Ladder Block (No. 13) ush to between the front and central posts.
  • Page 9 Please retain product label and instructions for future reference Step 12 Step 11 Parts needed - Parts needed - Pre drill Pre drill SET UP 1 & 2 hole hole Locate the Slide Framing (No.18) to If you are constructing Set Ups 1 or 2, this is your nal step.
  • Page 10 Please retain product label and instructions for future reference Step 14 Step 13 Parts needed - Parts needed - SET UP 3, 4, 7 & 8 SET UP 3, 4, 7 & 8 Pre drill Pre drill hole hole Locate the Safety Strips (No.17) per Place the slide (No.6) into position rail in between the gaps in the rails centrally ontop of the Slide Framing.
  • Page 11 Please retain product label and instructions for future reference Step 15 Parts needed - Pre drill hole SET UP 5 & 6 Locate the remaining Safety Strip (No.17) onto the inside of the Rail 50kg closest to the Slide, ensuring it is ush to the front support post.
  • Page 12 Please retain product label and instructions for future reference It is ESSENTIAL that you apply wood treatment immediately after the building has been assembled. AFTER TREATMENT: score around protective cover on glazing and carefuly peel covering back Playhouse Maintenance: It is recommended that the following checks and maintenance are carried out at the beginning of each season as well as at regular intervals during the usage season.
  • Page 14 REGISTER FOR YOUR PLEASE SCAN HERE: ANTI-ROT GUARANTEE TODAY...