Introduction To The Projector; Congratulations On Your Purchase Of The Projector; Features You'll Enjoy - NEC NP110 User Manual

Nec np110: user guide
Hide thumbs Also See for NP110:
Table of Contents

Advertisement

 Introduction to the Projector

This section introduces you to your new projector and describes the features and controls.

Congratulations on Your Purchase of the Projector

This DLP
projector is one of the very best projectors available today. The projector enables you to project precise
®
images up to 300 inches (measured diagonally) from your PC or Macintosh computer (desktop or notebook), VCR,
DVD player or document camera.
You can use the projector on a tabletop or cart, you can use the projector to project images from behind the screen,
and the projector can be permanently mounted on a ceiling*1. The remote control can be used wirelessly.
*1 Do not attempt to mount the projector on a ceiling yourself.
The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily
injury.
In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance with any
local building codes. Please consult your dealer for more information.

Features you'll enjoy:

Quick start & Quick Power Off
7 seconds after turning on the power, the projector is ready to display PC or video images.
The projector can be put away immediately after the projector is powered down. No cool down period is required
after the projector is turned off from the remote control or cabinet control panel.
Direct Power Off
The projector has a feature called "Direct Power Off". This feature allows the projector to be turned off (even when
projecting an image) by disconnecting the AC power supply.
To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and
a breaker.
Less than 1W in standby condition with energy saving technology
Selecting [POWER-SAVING] for [STANDBY MODE] from the menu can put the projector in power-saving mode
that consumes only 0.49W (100-130V AC)/0.71W (200-240V AC).
Carbon Meter
This feature will show energy-saving effect in terms of CO
MODE] is set to [ON].
The amount of CO
2
in the INFO of the on-screen menu.
7W built-in speaker for an integrated audio solution
Powerful 7 watt speaker provides volume need for large rooms.
Two computer inputs provided (NP216 only)
The NP216 projector comes with two computer input ports (Mini D-Sub15P) with audio inputs (two stereo mini
jacks) as well as composite and S-video inputs with audio inputs (a pair of L/R RCA jacks).
DLP
projector with high resolution and high brightness
®
High resolution display - up to UXGA compatible, XGA (NP216/NP215/NP210)/ SVGA (NP115/NP110) native
resolution.
AUTO POWER ON and AUTO POWER OFF features
The AUTO POWER ON(AC), AUTO POWER ON(COMP.), AUTO POWER OFF, and OFF TIMER features eliminate
the need to always use the POWER button on the remote control or projector cabinet.
emission reduction will be displayed in the confirmation message at the time of power-off and
emission reduction (kg) when the projector's [ECO
2
2
1. Introduction

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Np115Np210Np215Np216Np115-rNp216j-3d ... Show all

Table of Contents