Before Use; Product Overview; System Overview - Panasonic WX-CR480P Operating Instructions Manual

Before use

Product overview

This product is a wireless repeater to be used with an All-In-One Headset (WX-CH450/
WX-CH455/WX-CH457P: sold separately) and a Belt Pack (WX-CT420: sold separately).
It connects to a Center Module (WX-CC411BP/WX-CC412BP: sold separately) to function.
● It uses a system based on the 1.9 GHz DECT* standard to achieve a stable connection
over a wide area which makes for a clear audio with little interference.
* DECT (Digital Enhanced Cordless Telecommunications) is a digital cordless
communication standard.
● Installation is easy and can be performed on a wall.
● A USB power adaptor and USB cable are not included. Purchase commercially available
products.

System overview

A repeater is used when you need to extend the range of an All-In-One Headset or a Belt
Pack to include areas where reception was previously not available.
Two repeaters can be registered to one lane of a center module.
In the case of a single lane center module (WX-CC411BP), two repeaters can be
registered to the center module.
In the case of a dual lane center module (WX-CC412BP), one repeater can be registered
each for lane A and lane B, or two repeaters can be registered in either lane A or lane B.
System connection example
Repeater is installed within the coverage area of the center module.
2 repeaters can be connected to lane A or lane B.
Configuration of
connected devices
Center module
6
WX-CR480P_PUQX1029ZAV1_OI_en-fr.indb
STATUS
Repeater
Lane A
STATUS
Repeater
6
WX-CR480 All-In-One
ID REG
Headset
All-In-One
Headset
WX-CR480
ID REG
2021/11/08 13:25:13