Table of Contents
Advertisement
Machine Translated by Google
About the confirmation sound of
the operation
A confirmation sound (beep sound) can be emitted when the
unit is operated or when a specific condition is reached. During
recording, the confirmation sound is output only from the
PHONES terminal of the main unit.
Set the BEEP switch to set the
confirmation sound to "ON".
Confirmation sound
and operation • High sound "pip"
-Turn on the power
-Start playback or recording
1) -Press A to remove the MD
• Low sound "Bi"
-Net MD mode is entered. •
Long and high sound "Pee" -Power
is turned off-Playback and
recording are stopped-Net MD
mode is canceled.
• Continuous high-pitched "beep"
-Cancel or end menu operation
did
-Edit menu items or settings do not switch anymore
-Returned to normal playback, the recording level is
Each setting (INPUT, REC MODE, etc.) of this unit,
such as returning to 0 dB (initial setting value)
PLAY MODE, REPEAT, etc.) has returned to
its initial state. • Continuous low-pitched sound
"Bibi" -No more switching of setup menu items or
settings
• Beep and treble "Bip" -The edit
menu sub-item or setting value does not switch
anymore.
BEEP
• High-pitched sound "pee-pee-pee" three times in a row
-While recording or recording is paused, the peak
level meter "OVER" lights up (recording level
exceeds the appropriate value) -INPUT, REC
MODE, PLAY MODE
Switching operation is invalid
-N or X without MD
pushed
-Press z (Record) when there is no time left on
the MD-The USB cable is not connected
correctly ("Check USB" is displayed) -The
operation of NET MD is invalid ("Push STOP!"
Is displayed) • Low-pitched sound is heard three
times in a row.
-Recording level has reached the maximum or minimum
value-Level Sync setting has reached the maximum or
minimum value • Continuous low-pitched sound
continues "bi-bi-bi-bi-bi-bi" -Self-diagnosis function has
worked • High-pitched sound 5 times in a row "Peep
Peep Peep"
-There is less than 3 minutes left to record during
recording. • Low-pitched sound continues "Bi,
Bi, Bi"
-This unit is still in the recording standby state • Low
sound is "bibibi" three times in a row-The unit is in the
recording level change state • Low sound and high
sound are in the recording standby state multiple times
in a row-Recording standby state When, the
remaining time of MD is expressed in units of 10
minutes. For example, 10 minutes will sound 1
time, 50 minutes will sound 5 times, and 100
minutes will sound 10 times.
1) The confirmation sound does not affect the recorded content.
Set the BEEP switch so that there is no
confirmation sound to "OFF".
Note If you
press SCROLL on the remote control without MD, a confirmation sound will be
heard and the settings will change as follows. • Shuffle playback and program
playback are canceled and
It will return to normal playback.
• All song repeats or one song repeats are cancelled
vinegar.
• The recording mode changes to stereo.
• The input changes to ANALOG.
43
Advertisement
Table of Contents
