Table of Contents
Advertisement
Machine Translated by Google
Connect to audio
equipment
1) When there is no MD terminal, DAT, TAPE, VIDEO,
Connect to either the LINE or AUX terminal.
2) It may be written as "(REC) OUT", "OUTPUT", "REC",
"Recording", etc.
3) It may be written as "IN", "INPUT", "PLAY", "play", etc. 4)
It may be written as "optical digital", "DIGITAL", "OPT
(ICAL)", etc.
Necessary codes
Audio connection cord (supplied)
Used to connect AB.
White (L: the left)
Red (R: right)
Insert the red plug of the audio connection cord into the right
(R) terminal and the white plug into the left (L) terminal.
Optical digital connection cable (only one
included) Used to connect a CD.
Plug the optical digital connection cable in parallel until you
hear a click into the digital optical end. If the connection is
not correct, "Din Unlock" and "C71" may be displayed
alternately. Also, do not bend or bundle the optical digital
connection cable.
10
Listen to AMD sounds
Reproduces the MD sound through a system stereo or
amplifier. Also, on the tape of the system stereo, the tape
deck connected to the amplifier, etc.
You can record the contents of MD in analog.
Power cord
Connect B to D only if there is a corresponding terminal on
the system stereo or amplifier side.
An A or D connection is required to hear the MD. Also,
when recording to MD, B or C connection is required.
Analog recording to B MD
The sound of the system stereo CD, radio, tape, CD player,
radio, cassette deck, etc. connected to the amplifier is
analog-recorded on the MD of this unit.
Digitally record to C MD
System stereo CD, MD, DAT deck,
The sound of the BS / CS tuner, CD player connected to the
amplifier, MD deck, etc. is digitally recorded on the MD of
this unit.
Listen to the sound of D MD
Reproduce the MD sound with better sound quality through
a system stereo or digital amplifier with a digital input terminal.
You can also digitally record the MD sound of this unit on a
system stereo MD or an MD deck that is digitally connected
to the amplifier.
Connection Precautions •
Connect the power cord until all connections are complete.
please do not. • Turn
off the power of this unit and the devices connected to this
unit before connecting. • Insert the plug firmly into the
terminal. Incomplete connections can cause noise and
White (L: the left)
malfunction.
Red (R: right)
Plug the plug that connects
the power cord into the wall outlet.
Advertisement
Table of Contents
