Sony MDS-S500 Instruction Manual page 33

Machine Translated by Google
3 Turn the AMS knob until the song number
of the previous song is displayed
(press the ./> on the remote control
repeatedly ), and then press YES for
the AMS knob . Repeats the end of
the previous song and the beginning
of the last song for a few seconds).
4 Turn the AMS knob until the song number of the
song behind it is displayed (press the ./> on
the remote control repeatedly ), and then
press the AMS knob or YES. "Complete!" Is
displayed for a few seconds and then
disappears. Then, the selected songs will be
connected and playback will start from the
beginning of the created song.
Press MENU / NO or x to stop
connecting songs .
Notes •
The recording modes (stereo, LP2 stereo, LP4 stereo, monaural)
cannot be the same song. • When "Impossible" is displayed, the
two songs cannot be connected. If you repeat editing many
times, you may not be able to connect songs, which is a system
limitation of MD. This is not a malfunction.
MOVE
You can move the song to the desired position and change the
song order. If you change the song order, the song numbers will
be renumbered from the beginning.
Example) Move the 3rd song to the 2nd song
Before
editing the song number
A song B song C song D song
After MOVE
A track C track B track D track
1 During stop, play, pause,
Press MENU / NO "Edit
Menu" is displayed.
2 Turn the AMS knob (Rimo)
Repeatedly press. /> on the computer
to display "Move?" And press the AMS
knob or YES.
3 Turn the AMS knob (press the ./> on the
remote control repeatedly ) until the
song number of the song you want to
move is displayed, and then press
YES for the AMS knob.
Continue to the next page
33