Table of Contents
Advertisement
HVAC Setup on Screen
IMPORTANT: Make sure the CT32 is powered up and
the mode is set to OFF. HVAC selection switches must be
set first [pg 8].
• With mode in OFF press MENU and touch HVAC SET UP.
• Use +/- arrows to select HVAC SET UP number on
screen. The LCD display will show your selection and
indicate the number of stages you have selected. During
setup, 2nd stage will blink when both heat and cool have
2nd stages.
• Touch HOME to permanently save this configuration.
If you have a Normal HVAC system...
1 stage HEAT, 1 stage COOL select
2 stage HEAT, 1 stage COOL select
1 stage HEAT, 2 stage COOL select
2 stage HEAT, 2 stage COOL select
IMPORTANT: You must touch HOME after you have made you configuration selection.
This will save this configuration into permanent memory of the CT32.
If you have a HEAT PUMP HVAC system...
HEAT PUMP with no AUX heat
1
2 stage HEAT PUMP with no AUX
2
HEAT PUMP with AUX heat
HEAT PUMP with 2 stage AUX heat
3
2 stage HEAT PUMP with AUX heat
4
2 stage HEAT PUMP with 2 stage AUX heat select F
PG
HVAC
HEAT
SETUP
COOL
2
ND STG
select A
select b
select C
select d
select E
10
Advertisement
Table of Contents
