Advertisement
CLEANING AND MAINTENANCE
Regular cleaning and maintenance keep the machine in working condition and ensure
perfect coffee flavour, a constant coffee flow, and excellent milk froth for a long period
of time.
Disconnect the appliance from the mains and let it cool before cleaning it with damp cloth.
CLEANING THE FILTER HOLDER AND THE FILTER
The filters should be kept clean to guarantee perfect results.
1. Remove the filter from the filter holder and wash it with warm water.
2. If you notice a malfunction when brewing coffee, immerse the filter in boiling water
for 10 minutes and then rinse with running water.
Warning :
the filter holder has cooled down completely.
CLEANING THE STEAM WAND
After each milk frothing:
Clean the Steam wand with a damp cloth. To clean it more thoroughly, you can
1.
unscrew the nozzle and wash it with running water.
Open the steam knob, allowing the steam to escape for one or two seconds to clear
2.
the nozzle hole.
Clean the nozzle with wet sponge.
3.
CLEANING THE GRID AND DRIP TRAY
Remove the drip tray and the grid and wash them with water. Do not use abrasive
1.
cleaning tools.
CLEANING THE WATER TANK
Remove the Water tank and wash it with fresh water.
Warning :
the machine is turned off. The drain hose may reach high tempera-
tures during operation.
CLEANING THE BREW UNIT
Regularly remove any residual coffee grounds from the Brew unit using a brush
and wash with hot water following the steps below.
1.
Do not insert the Filter holder.
2.
Place an empty cup under the Brew unit.
3.
Press the Espresso button and fill the cup with water.
4.
Press the Espresso button again to stop.
To avoid bums, the filter must only be replaced when
To avoid burns, the tank should be cleaned only when
13
Hide quick links:
Advertisement
