Cleaning And Maintenance; Basic Cleaning - GeekChef CJ-265E User Manual

CLEANING AND MAINTENANCE

BASIC CLEANING

1. Disconnect the appliance from the mains and let it cool before cleaning
it with damp cloth.
2. Do not let water or any other liquid get into the machine.
3. After washing, dry all parts before fitting them together and storage.
4. To clean the steam tube and nozzle after milk frothing, use a damp cloth
to remove the steam nozzle cover and wash it by clean water. Use the wet
cloth to remove the milk residue on the steam tube after removing the
steam nozzle cover. Repeat with steam function after cleaning finished to
make sure steam can come out from the nozzle.
In case no steam comes out, carefully use a needle to lose the milk residue
from the steam nozzle to remove the blockage. Rinse with clean water and
dry it.
5. Detach the Drip Tray, pour away the water of the Drip Tray, rinse with
clean water and dry it.
TIPS FOR CLEANING THE STEAM NOZZLE
Warning: Please mind the hot water and operate carefully.
In order to prevent the steam nozzle from blocking and make it
easier to clean, we suggest you to clean immediately after frothing
milk.
Note: If it is not cleaned in time, it will produce bacteria and bad smell
which is not good for health.
1. After the blue indicators stop flashing, turn the knob to the Steam side.
If the steam is weak, check whether the hole of the froth nozzle is blocked.
You can use a cleaning pin to clean and unblock the steam nozzle.
2. Press and hold the frothy wand, separate the stainless sleeve and pull it
out(fig. 30 ~ 31). Clean the nozzle with wet sponge.
(Fig. 30) (Fig. 31)
13