Turn The Tv On Or Off From Standby Mode; Choose A Tv Channel And Watch Images From External Devices; Adjust The Volume - JVC LT-19K80ZU Instructions Manual

Turn the TV on or off from
standby mode
Press the (Standby) button to
turn the TV on or off.
When the TV is turned on, the power lamp
turns from red to green.
• The power can also be turned on by
pressing the AV button, P
or Number buttons.
• The TV will turn off automatically when
no TV input signal (not EXT input
signals) is detected for 5 minutes.
To turn the TV on or off, set the VCR/TV/
DVD switch on the remote control to the
TV position and press the
button.
If the VCR/TV/DVD switch on the remote
control is set to a position other than TV,
the TV will not be turned on or off even if
the (Standby) button is pressed.
Caution
• The (Standby) button on the TV
does not fully isolate the TV from the
AC supply. If you are not going to use
the TV for a long period, be sure to
disconnect the AC plug from the AC
socket.
Choose a TV channel and
watch images from external
devices
Use the Number buttons:
Enter the programme number (Pr.)
of the channel using the number
buttons.
Example:
• Pr. 6 → press 0 and 6
• Pr. 12 → press 1 and 2
Use the P
Press the P
choose the programme number
(Pr.) you want.
buttons
(Standby)
buttons:
buttons to
Basic operations (Remote control)
Use the AV button:
Press the AV button to choose an
EXT terminal.
TV mode
Last
Programme
number
• If you do not have a clear picture or no
colour appears, change the Colour System
manually. See "Colour System" on
page 24.
• If you cannot hear the normal sound even
if the picture of the TV channel appears
normally, follow the description "Manual
Program" on page 22 to use the Sound
System function to change the Sound
System setting.
To return to a TV channel:
Press the P
buttons.
To use the programme number Pr. 0
(AV):
When the TV and VCR are connected only
by the aerial cable, choosing the programme
number Pr. 0 (AV) allows you to view
images from the VCR. Set the VCR RF
channel to the programme number Pr. 0 (AV)
manually. For details, see "Manual Program"
on page 22.

Adjust the volume

Press the (Volume)
to adjust the volume.
The volume level indicator appears and the
volume changes as you press the
(Volume)
EXT modes
EXT-1
EXT-1
EXT-2
EXT-2
EXT-3
EXT-3
EXT-3 S-VIDEO
EXT3-S
HDMI
EXT-4
PC IN
PC
buttons or the Number
buttons
buttons.
13