JVC LT-19A210 Owner's Manual
JVC LT-19A210 Owner's Manual

JVC LT-19A210 Owner's Manual

19" wide tft lcd television with digital tuner
Hide thumbs Also See for LT-19A210:
Table of Contents

Advertisement

Available languages

Available languages

19" WIDE TFT LCD TELEVISION WITH DIGITAL TUNER
TÉLÉVISEUR GRAND ÉCRAN ACL TFT DE 19 po AVEC
SYNTONISEUR NUMÉRIQUE
LT-19A210
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),
consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-
respondant au téléviseur.
When shipped from the factory, the Signal Type option is set to the "Cable" (Cable Television) mode.
If not using Cable TV, set this menu option to the "Air" position.
Lorsque l'appareil sort de l'usine, l'option « Signal Type » est en mode « Cable » (câblodistribution). Si vous
n'utilisez pas la câblodistribution, sélectionnez l'option « Air ».
Before operating the unit, please read this manual thoroughly.
Avant de faire fonctionner l'appareil, veuillez lire le présent guide attentivement.
(19" class/18.50 diagonal)
(19" classe/18,50 diagonale)
ATTENTION
ATTENTION
AIR/CABLE MODE SELECTION
SÉLECTION DU MODE AIR/CABLE
OWNER'S MANUAL
GUIDE D'UTILISATION

Advertisement

Table of Contents
loading

Summary of Contents for JVC LT-19A210

  • Page 1 19” WIDE TFT LCD TELEVISION WITH DIGITAL TUNER TÉLÉVISEUR GRAND ÉCRAN ACL TFT DE 19 po AVEC SYNTONISEUR NUMÉRIQUE LT-19A210 (19” class/18.50 diagonal) (19” classe/18,50 diagonale) If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code.
  • Page 2 ENGLISH CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY FROM THIS PRODUCT AT TIMES.
  • Page 3 15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
  • Page 4: Important Safety Instructions

    20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
  • Page 5: Safety Precautions

    IMPORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.
  • Page 6: How To Attach The Stand

    How to attach the stand NOTE: • Unplug the AC cord from the AC INPUT terminal. • Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any damage to the unit. •...
  • Page 7: Features

    • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. •...
  • Page 8: Table Of Contents

    Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ...3 SAFETY PRECAUTIONS ...5 How to attach the stand ...6 How to remove the stand ...6 Features ...7 Power source ...7 Contents ...8 Parts and functions ...9 Remote control ...10 Antenna connections ...11 Cable TV connections ...12 Connections to other equipment ...13 TV operation...
  • Page 9: Parts And Functions

    Front Rear HEADPHONE jack AC INPUT jack COMPONENT IN jacks (Y/Pb/Pr/ AUDIO (L(MONO)/R)) (VIDEO/S-VIDEO/AUDIO (L(MONO)/R)) Parts and functions Right side To display the menu screen. Remote sensor Press MENU button to display the menu screen. CHANNEL POWER indicator +/– buttons and INPUT/ENTER button Red: Standby can be used to select the desired setting Green: On...
  • Page 10: Remote Control

    Remote control 1.POWER Button - Used to turn the power on/off to the LCD TV. 2.Direct Channel Selection Buttons (0-9) - Allows direct access to any channel of the LCD TV. 3.– Button -This button is the “–” button used when selecting digital channels.
  • Page 11: Antenna Connections

    If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 12 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Antenna Jack 300-75 ohm...
  • Page 12: Cable Tv Connections

    Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
  • Page 13: Connections To Other Equipment

    The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs. To connect the LCD TV to a VCR Rear of the unit To VIDEO/AUDIO IN...
  • Page 14 Connections to other equipment Using an AV Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, etc.
  • Page 15 Connections to other equipment To connect a HDMI or a DVI device to the unit The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.
  • Page 16: Tv Operation

    Starting setup The Starting Setup menu appears the first time you turn on the TV, and assists you to specify the Air/Cable setting, and program your channels automatically. IMPORTANT: Make sure that the antenna or cable TV system connection is made! To turn on the TV, press POWER (POWER indicator on the front of the unit changes green.
  • Page 17: Quick Guide For Menu Operation

    DISPLAY Press DISPLAY to display the current information on the screen. When the TV receives a digital signal, the digital information will appear. 62-1 HDTV Moving Picture1 Sleep Timer CH-1 Digital English No Program Information is available Full 1080i • Channel number •...
  • Page 18: Convenience Functions

    Convenience functions You can change the default settings by pressing the Menu button on your remote, then select the one of the icons at the top of the menu - follow the On-Screen prompts to set your preferences. Icon Selected Items Picture Picture Brightness /...
  • Page 19: Memorizing Channels

    Memorizing channels This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. To use this TV with an antenna, set the Signal Type option to the Air mode.
  • Page 20: Checking The Digital Signal Strength

    Clear All All channels are deleted from the channel memory. Select “Channel”, then press Press to select “Add/Delete”, then press or ENTER. Press to select “Clear All”, then press or ENTER. Add/Delete Adding Channel >> Add/Delete >> Clear All >> : Select ENTER:Set Checking the digital...
  • Page 21: Setting The V-Chip

    Setting the V-Chip An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV Rating” and “Movie Rating” if this data is transmitted. You may set this restriction separately.
  • Page 22: Closed Caption

    Press to select “V-Chip”, then press to select “On”. Press to select “V-Chip Set (DTV)”, then press or ENTER. If the TV is not storing the additional rating system, the TV will begin downloading it, which may take some time to be completed. Set your preferred content rating limits for the additional rating system.
  • Page 23: Setting The Picture Size

    Press to select “CC Advanced”, then press or ENTER. The CC Advanced menu will appear. Press to select the desired item, then press to change the setting. CC Advanced Text Size Auto Text Type Auto Text Edge Auto Text Color Auto Text Opacity Auto...
  • Page 24: Reception Disturbances

    Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.
  • Page 25: Troubleshooting

    Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS • Make sure the power cord is plugged in.
  • Page 26: Specifications

    Specifications GENERAL Power supply: Power consumption: Weight: Dimensions: Operating temperature: Operating humidity: Type: Display method: Number of Pixels: Broadcasting system: Receiving channels: Tuner type: Inputs: Outputs: Speaker: Audio output power: ACCESSORIES Designs and specifications are subject to change without notice. AC 120V 60Hz Operation: 29W Stand by: 0.8W...
  • Page 28 FRANÇAIS ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR ATTENTION: AFIN DE REQUIRE LES RISQUES DE CHOC ELECTRIQUE, NE RETIREZ PAS LE COUVERCLE (OU LE PANNEAU ARRIERE). AUCUNE PIECE NE PEUT ETRE REPAREE PAR L’UTILISATEUR. CONFIEZ L’APPAREIL A UN TECHNICIEN QUALIFIE. AVERTISSEMENT: AFIN D’ÉVITER TOUT RISQUE D’INCENDIE OU D’ÉLECTROCUTION, N’EXPOSEZ PAS CET APPAREIL À...
  • Page 29 CONSIGNES DE SÉCURITÉ IMPORTANTES 1) Lisez ces consignes. 2) Gardez ces consignes. 3) Conformez-vous à tous les avertissements. 4) Suivez toutes les consignes applicables. 5) N’utilisez pas cet appareil près de l’eau. 6) Nettoyez uniquement à I’aide d’un chiffon sec. 7) N’obstruez jamais les orifices d’aération de l’appareil et installez-le en conformité...
  • Page 30 20) Quand il est nécessaire de remplacer certaines pièces de l’appareil, assurez-vous que le réparateur utilise des pièces recommandées par le fabricant ou ayant les mêmes caractéristiques que les pièces originales. Le remplacement par des pièces non autorisées peut causer un incendie, des chocs électriques ou être la source d’autres dangers.
  • Page 31: Précautions De Sécurit

    CONSIGNES DE SÉCURITÉ IMPORTANTES CONDENSATION De la condensation se forme sur les composantes internes de l’appareil si ce dernier est déplacé rapidement d’un environnement froid à un endroit tempéré ou si la température de la pièce augmente subitement. La performance de l’appareil peut alors en être altérée.
  • Page 32: Comment Fixer Le Socle

    Comment fixer le socle REMARQUE: • Débranchez le cordon d’alimentation de la prise d’alimentation CA. • Avant de commencer cette procédure, veillez à poser le TV sur une surface propre, sécurisée et matelas- sée pour éviter toute détérioration de l’écran. •...
  • Page 33: Source D'alimentation

    • Syntonisateur numérique intégré - Vous pouvez regarder une émission numérique sans utiliser de décodeur de télévision numérique. • Décodeur de sous-titres avec mode de texte intégral - Fait apparaître les sous-titres ou un texte sur tout le téléviseur pour les téléspectateurs malentendants. •...
  • Page 34 Table des matières Avant d’utiliser l’appareil CONSIGNES DE SÉCURITÉ IMPORTANTES .3 PRÉCAUTIONS DE SÉCURITÉ ...5 Comment fixer le socle ...6 Comment enlever le socle ...6 Caractéristiques ...7 Source d’alimentation ...7 Table des matières ...8 Emplacement des commandes ...9 Télécommande ...10 Raccordement à...
  • Page 35: Emplacement Des Commandes

    Vue avant Arrière Prise HEADPHONE Prise AC INPUT Prises COMPONENT IN (Y/Pb/Pr/AUDIO (L(MONO)/R)) (VIDEO/S-VIDEO/AUDIO (L(MONO)/R)) Emplacement des commandes Coté droite Pour afficher le menu à l’écran du Capteur de la télécommande téléviseur. Appuyez sur MENU pour afficher le menu Voyant d’alimentation des fonctions à...
  • Page 36: Télécommande

    Télécommande 1. Touche POWER - Pour allumer ou éteindre le télévi- seur ACL. 2. Touches d’accès direct (0 à 9) - Permet un accès direct à n’importe quel canal du téléviseur ACL. 3. Touche – - Cette touche sert lors de la sélection de canaux numériques.
  • Page 37: Raccordement À L'antenne

    Si vous utilisez une antenne intérieure ou extérieure, suivez les directives ci-dessous, selon le type d’antenne que vous employez. Si vous êtes abonné à un service de câblodistribution, voyez les consignes de raccordement à la page 12. Antenne VHF/UHF combinée (câble unique de 75 ohms ou câble à conducteurs jumelés de 300 ohms) Borne de raccordement...
  • Page 38: Raccordement Au Réseau De Câblodistribution

    Raccordement au réseau de câblodistribution Ce téléviseur a une gamme de syntonisation étendue et peut capter la plupart des canaux câblodistribués sans avoir besoin d’un convertisseur. Certains câblodistributeurs offrent des « canaux payants », dont le signal est brouillé. Le débrouillage de ces signaux en vue d’un visionnement normal doit être effectué...
  • Page 39: Raccordement À Un Autre Appareil

    La configuration exacte des liaisons entre les divers appareils audio et vidéo et le présent produit dépend du modèle et des particularités de chacun. Pour connaître l’emplacement des entrées et des sorties audio et vidéo, reportez-vous au mode d’emploi accompagnant chaque appareil. Raccordement du téléviseur ACL à...
  • Page 40 Raccordement à un autre appareil Utilisation d’un amplificateur AV à son ambiophonique numérique intégré Si vous utilisez un amplificateur à son ambiophonique numérique intégré, vous pouvez profiter de divers formats audio, notamment le Dolby numérique ambiophonique (Dolby Digital Surround), qui vous donne exactement le même son qu’au cinéma.
  • Page 41 Raccordement à un autre appareil Raccordement d’un dispositif HDMI ou DVI à l’appareil L’entrée HDMI reçoit un signal audio numérique et un signal vidéo non compressé d’un dispositif HDMI ou un signal vidéo numérique non compressé d’un dispositif DVI. Si vous branchez un dispositif DVI avec un câble adaptateur HDMI-DVI, seul un signal vidéo est transféré. Des câbles audio analogiques séparés sont nécessaires.
  • Page 42: Fonctionnement Du Téléviseur

    Starting Setup (Configuration au démarrage) Le menu Auto Setup s’affiche la première fois que le téléviseur est mis sous tension de spécifier le réglage Air/Câble et de programmer automatiquement les canaux disponibles. IMPORTANT: S’assurer que l’antenne ou le système de TV câblée est bien connecté. Pour allumer l’appareil, appuyez sur POWER.
  • Page 43: Guide Rapide Pour Les Opérations Menu

    Input Select 0.TV 1.Video 2.Component 3.HDMI 4.PC [0-4]:Select CH +/ - Pressez et relâchez CH +/-. L’appareil passe automatiquement au prochain canal mis en mémoire. Pour obtenir de bons résultats, avant de choisir les canaux, ils doivent être mis en mémoire. Consultez la rubrique «...
  • Page 44: Fonctions Personnelles

    Fonctions personnelles Vous pouvez modifier les paramètres par défaut en appuyant sur le bouton Menu de la télécommande. Sélectionnez ensuite une icône dans la partie supérieure du menu. Suivez les invites à l’écran pour définir vos préférences. Icon Rubriques sélectionnées Picture Picture Brightness...
  • Page 45: Mise En Mémoire Des Canaux

    Mise en mémoire des canaux Ce téléviseur est muni d’une mémoire de canaux, qui permet de passer au canal mémorisé suivant ou précédent et de sauter les canaux non désirés. Avant de syntoniser les canaux, il faut tout d’abord les programmer dans la mémoire du téléviseur.
  • Page 46: Vérification De La Force Du Signal Numérique

    Répétez les procédures décrites aux étapes 4 à 5 afin d’ajouter (ou effacer) d’autres canaux dans la mémoire du syntonisateur. Effacement complet Tous les canaux sont effacés de la mémoire de canaux. Sélectionner « Channel », puis sur Appuyez sur pour sélectionner «...
  • Page 47: Utilisation De La Puce V

    Video Label Video Component HDMI : Select : Adjust – : Utilise le nom d’étiquette par défaut : Magnétoscope : Lecteur DVD : Décodeur de DTV : Démodulateur/décodeur satellite : Décodeur de TV câblodistribution : Appareil HDMI (seulement pour les entrées HDMI) Utilisation de la Puce V Vous pouvez régler un âge limite pour empêcher...
  • Page 48: Sous-Titrage

    Appuyez sur pour sélectionner « Change Password », puis sur L'écran Change Password apparaît. Entrez un nouveau mot de passe à l’aide des touches numériques (0-9), puis appuyez sur ENTER. Entrez de nouveau le même mot de passe pour confirmer, puis appuyez sur ENTER. Le mot de passe est maintenant enregistré.
  • Page 49: Sous-Titrage Avancé

    • Si le texte n’est pas disponible dans votre zone de réception, un rectangle noir peut apparaître à l’écran. Si cela se produit, mettez le réglage des CC Setting sur « Off ». • Lorsque la fonction des sous-titres est sélectionnée, les sous-titres apparaissent au bout d’environ 10 secondes.
  • Page 50 Natural Dans certains cas, cette image s’affiche au format standard 4:3 avec des bandes latérales noir. Cinema Wide1 (pour émissions de format 4:3) Pour remplir l’écran, les bords droit et gauche sont étirés, toutefois, le centre de l’image ne s’écarte pas beaucoup de ses proportions antérieures.Les bords supérieur et inférieur de l’image peuvent être cachés.
  • Page 51: Problèmes De Réception

    Il est possible de remédier à la plupart des interférences subies par le téléviseur en réglant la hauteur et en changeant la position de l’antenne VHF/UHF. Pour obtenir les meilleurs résultats, il est recommandé d’utiliser une antenne extérieure. Les types les plus courants de brouillage en télévision sont expliqués ci-dessous. Si l’un de ces symptômes apparaît lorsque le téléviseur est raccordé...
  • Page 52: Guide De Dépannage

    Guide de dépannage Utilisez la liste de contrôle suivante pour résoudre les problèmes que vous avez avec votre téléviseur ACL. Si les problèmes persistent, consultez le revendeur ou le centre de service autorisé le plus près de chez vous. Vérifiez que tous les raccordements avec les autres appareils sont effectué correctement. PROBLÈME SOLUTIONS POSSIBLES •...
  • Page 53: Fiche Technique

    DONNÉES GÉNÉRALES Source d’alimentation : Consommation de courant : Poids : Dimensions : Température de fonctionnement : 5 ˚C à 40 ˚C Humidité de fonctionnement : Type : Méthode d’affichage : Nombre de pixels : Système de radiodiffusion : Canaux de réception : Type de tuner : Entrée : Sorties :...
  • Page 54 Memo...
  • Page 55 Memo...
  • Page 56 JVC U.S.A. JVC CANADA, INC. Division of JVC Americas Corp. 21 Finchdene Square 1700 Valley Road Scarborough, Ontario Wayne, New Jersey, 07470 Canada, M1X 1A7 Printed in Thailand Imprimé en Thailande J3AI0821A SH 10/05...

Table of Contents