Turn The Tv On Or Off From Standby Mode; Choose A Tv Channel And Watch Images From External Devices - JVC LT-26D50BJ Service Manual

Basic operations (Remote control)
Turn the TV on or off from
d u
standby mode
Press the # (standby) button to turn
the TV on or off.
When the TV is turned on, the power lamp
lights green.
• The power can be turned on by pressing
TV/DTV
the
Number buttons.
To turn the TV on or off, set the VCR/TV/
DVD switch on the remote control to the
TV position and press the # button.
If the VCR/TV/DVD switch on the remote
control is set to a position other than TV,
the TV will not be turned on or off even if
the # button is pressed.
Choose a TV channel and
p a t
watch images from external
devices
Switching between Digital
terrestrial broadcasting (DVB-T)
and Analogue terrestrial
broadcasting.
Press the TV/DTV button.
The broadcasting is switched every time the
button is pressed.
Use the number buttons:
Enter the programme number (PR)
of the channel using the number
buttons.
Example:
• PR 6 → press 6
• PR 12 → press 1 and 2
o r
• PR 123 → press 1, 2 and 3
18
button, p p buttons or
Use the p p buttons:
Press the p p buttons to
choose the programme number
(PR) you want.
• For Digital terrestrial broadcasting (DVB-
T), if the FAVOURITE setting in the
"Edit PR List" (see page 32) has been set,
only that programme number (PR) can be
chosen.
• For Analogue terrestrial broadcasting, an
EXT terminal can also be chosen.
Use the AV button:
Press the AV button to choose an
EXT terminal.
TV mode
Analogue
terrestrial
EXT-1
broadcasting
E1 or S1
Digital
terrestrial
PC
broadcasting
(DVB-T)
• You can choose a video input signal from
the S-VIDEO signal (Y/C signal) and
regular video signal (composite signal).
For details, see "S-IN (S-VIDEO input)"
on page 59.
• If you do not have a clear picture or no
colour appears, change the colour system
manually. See "COLOUR SYSTEM" on
page 48.
• If you choose an EXT terminal with no
input signal, the EXT terminal number
becomes fixed on the screen.
• This TV set has a function which can
automatically change over the input
according to a special signal output from
an external device. (The EXT-3 terminal
does not support this function.)
– When EXT-4 is chosen, motion differs
according to the "COMPONENT
AUTO SELECT" setting in the SET
UP menu.
For details, see "COMPONENT AUTO
SELECT" on page 58.
EXT modes
EXT-2
E2 S2
or
EXT-3
S3
E3 or
EXT-4
E4