Turn The Tv On Or Off From Standby Mode; Choose A Tv Channel And Watch Images From External Devices - JVC LT-19DK8WJ Instructions Manual

Basic operations (Remote control)
Turn the TV on or off from
standby mode
Press the
turn the TV on or off.
When the TV is turned on, the power lamp
will turn from red to green.
• The power can also be turned on by
pressing the AV button, P
or Number buttons.
To turn the TV on or off, set the VCR/TV/
DVD switch on the remote control to the
TV position and press the
button.
If the VCR/TV/DVD switch on the remote
control is set to a position other than TV,
the TV will not be turned on or off even if
the (Standby) button is pressed.
Caution
• The (Standby) button on the TV
does not fully isolate the TV from the
AC supply. If you are not going to use
the TV for a long period, be sure to
disconnect the AC plug from the AC
socket.
Choose a TV channel and
watch images from external
devices
Switching between Digital
terrestrial broadcasting (DVB-T)
and Analogue terrestrial
broadcasting.
Press the TV/DTV button.
The broadcasting is switched every time the
button is pressed.
Use the Number buttons:
Enter the programme number (Pr.)
of the channel using the number
buttons.
Example:
• Pr. 6 → press 0 and 6
• Pr. 12 → press 1 and 2
16
(Standby) button to
buttons
(Standby)
Use the P buttons:
Press the P
choose the programme number
(Pr.) you want.
• For Digital terrestrial broadcasting (DVB-
T), if the Favourite Lists setting (see
page 26) has been set, only those
programme numbers (Pr.) can be chosen.
Use the AV button:
Press the AV button to choose an
EXT terminal.
TV mode
Analogue
terrestrial
broadcasting
Digital
terrestrial
broadcasting
(DVB-T)
• When watching Analogue terrestrial
broadcasting or EXT-1 and EXT-3 input
images, if you do not have a clear picture
or no colour appears, change the Colour
System manually. See "Colour System"
on page 43.
• When watching Analogue terrestrial
broadcasting, if you cannot hear the
normal sound even if the picture of the
TV channel appears normally, follow the
description "Manual Program" on page 41
to use the Sound System function to
change the Sound System setting.
To return to a TV channel:
Press the TV/DTV button, the P
buttons or the Number buttons.
To use the programme number Pr. 0
(AV):
When the TV and VCR are connected only
by the aerial cable, choosing the programme
number Pr. 0 (AV) allows you to view
images from the VCR. Set the VCR RF
channel to the programme number Pr. 0 (AV)
manually. See "Manual Program" on
page 41.
buttons to
EXT modes
EXT-1
EXT-1
EXT-2
EXT-2
EXT-3
EXT-3
EXT-3 S-VIDEO
EXT3-S
HDMI
EXT-4
PC IN
PC