Advertisement
30
32
STEP 5: INSTALL MOUNTING HARDWARE
Install the rubber washer(30), metal washer(31), moun�ng
nut(32) and moun�ng screws(33), in order from undeneath
the countertop to the faucet.
STEP 7: CONNECT WATERLINES
Connect waterlines(34) to hot and cold copper lines. Connect
waterlines to angle stops. Tighten both ends of waterlines with a
wrench un�l snug. Check for leaks.
Note: Connect the red waterline with hot supply valve, and blue
waterline with cold supply valve.
STEP 9: CHECK FOR LEAKS
Check for leaks at the connec�ons. Re�ghten if necessary.
31
33
STEP 6: SECURE MOUNTING HARDWARE
Adjust direc�on of faucet body and handles. Tighten moun�ng
nuts(32) and mounitng screws(33) with screwdriver un�l snug.
STEP 8: FLUSH SPRAY HOSE
Remove spray head from spray hose. Hold �p of spray hose.
Turn faucet on and let the water run for 60 seconds to flush any
debris.
CARE & MAINTENANCE:
*To keep the product clean & shining, follow the steps below:
1.Rinse with clean water & dry with a so� cloth
2.Do not clean with soaps, acid polish, abrasives, or harsh cleaners
3.Do not use cloth with a coarse surface
4.Unscrew the aerator and clean when necessary
6
Advertisement
